H&Y Filters ARZ14 Overview
Key Features
- Fits NIKKOR Z 14-24mm f/2.8 S
- Water- and Oil-Resistant Design
- Double-Sided Coating
This 100mm K-Series Adapter Ring without CPL Slot from H&Y Filters is specifically designed to enable the use of a K-Series Holder on a NIKKOR 14-24mm Z F/2.8 S lens. This adapter ring's waterproof and oil-resistant quality is from a double-sided coating structure. The non-CPL version allows three H&Y filters to be magnetically stacked without vignetting.
.webp "GGS LCD Portable Ocular Hight Definition Magnification with Leather Pouch")
GGS LCD Portable Ocular Hight Definition Magnification with Leather Pouch
The GGSFOTO LCD Portable Ocular HD Viewfinder is a folding magnifier or screen shade . It is designed to provide a high quality viewfinder experience when shooting with a DSLR or Mirrorless CSC camera via the LCD screen. The GGSFOTO Ocular adopts an innovative design that makes it easy to attach and detach from the camera, provides a magnified view of the LCD, acts as a screen shade, folds into a compact package for easy transportation and storage and provides optional LCD protection when not in use.
- 3X Optical Magnification
- Classic design
- Easy and simple connection
- Friendly to swivel screen
- Support all types of screens
Full Screen Sunshade Hood
Four-direction sunshade hood for LCD view in sunlight
High Sharpness for Your Lcd Screen Photography
Using by the lens, both photo and video will be much sharp and real
Friendly for Your Pocket
Easy to be folded and taken along, convenient to use optical eyepiece
Gorgeous Appearance
Complete metal body , classic design, friendly to swivel screen
Innovative Optical Glass Lens
GGSFOTO LCD Ocular is made by special process, very clear for your shooting
Easy Magnetic Installation
Attach to the Gen5 Screen Protector
How To Use
Simply place the Ocular onto the LCD.
The magnets inside the edge of the frame will hold the Ocular firmly onto the metal frame / screen protector.
Now grasp the sides of the Ocular at the bottom and pull away from the LCD to open the device for use as a sunshade.
To use as viewfinder, slide the actuator at the top to the right and the lens will swing into position.
After use, to pack away, push the lens back into the stowed position, then squeeze the sides of the Ocular to let it fold back down.
Once folded, simply pull it away from the camera.
When not in use, keep the Ocular in its storage case for maximum protection.
Compatible Camera Models
| Canon | 1DX, 1DX II, 5D III, 5Ds, 5Dsr, 5D IV, 6D Mark II, 7D Mark II, 70D, 77D, 700D, 750D, 760D, 800D |
| Nikon | D5, D810, D810A, D750, D610, D500, D7100, D7200 , DF, (Snap-on for D850) |
| Fujifilm | GFX-50S, X-E3, X-T100, X-100F, X-T1, X-T2, X-A3, X-A5, X-A10, X-A20 |
| Olympus | E-P5, E-M5 II, EM1 II, E-M10 II, EM10 III |
| Sony | a7 II, a7S II, a7R II, a7 III, a7R III, a9, RX100 I-V, RX1, RX1R , RX1R II, RX10 I-IV |
| Pentax | 645Z |
H&Y Magnetic Adapter Ring 77-82mm
Key Features
- Use 82mm Filters on 77mm Lens
- Brass Ring Prevents Binding and Jamming
- Knurled Sides for Firmer Grip
- Matte Black Finish Minimizes Reflections
The 77-82mm H&Y Magnetic Adapter Ring 77-82mm allows you to use 82mm threaded filters on lenses with 77mm filter threads. It has knurled sides to provide a more textured grip when mounting or removing it from a lens. This step-up ring features brass construction to prevent binding and jamming, and a matte black finish to minimize reflections.
H&Y Magnetic Adapter Ring 72-82mm
Key Features
- Use 82mm Filters on 72mm Lens
- Knurled Sides for Firmer Grip
- Matte Black Finish Minimizes Reflections
- Corrosion-Resistant Hard Anodized Finish
The H&Y Magnetic Adapter Ring 72-82mm permits the use of 82mm threaded filters on lenses with 72mm filter threads. It has large side knurls to provide a more textured grip when mounting or removing it from a lens. This step-up ring features a lightweight aluminum alloy construction with a corrosion-resistant, matte black, hard-anodized finish for durability and to minimize reflections.
H&Y Magnetic Adapter Ring 67-82mm
Key Features
- Use 82mm Filters on 67mm Lens
- Knurled Sides for Firmer Grip
- Matte Black Finish Minimizes Reflections
- Corrosion-Resistant Hard Anodized Finish
The H&Y Magnetic Adapter Ring 67-82mm permits the use of 82mm threaded filters on lenses with 67mm filter threads. It has large side knurls to provide a more textured grip when mounting or removing it from a lens. This step-up ring features a lightweight aluminum alloy construction with a corrosion-resistant, matte black, hard-anodized finish for durability and to minimize reflections.
H&Y Magnetic Lens Cap 67mm (LC67)
Key Features
- For Use with Haida Magnetic Filters
- Metal Construction
Designed to work with the Magnetic Filter Series, the H&Y Magnetic Lens Cap 67mm snaps onto the front of your lens to protect it against physical damage, dust, and moisture.
H&Y Magnetic HD MRC ND KIT Filter 77mm
Key Features
- Magnetic stackable mounting
- Double sides Nano coating
- Water, oil and dust resistant
Magnetic round filter, easy to use, helps protect your lens from scratches, bumps, cuts reflections, comes with an 77mm adapter ring, makes your photography more convenient and easier.
H&Y Magnetic HD MRC CPL Filter KIT 77mm
Product Highlight
-Magnetic
-CPL Filter
-77mm filter thread
H&Y Magnetic HD MRC CPL Filter KIT 67mm
Product Highlight
-Magnetic
-CPL Filter
-67mm filter thread
H&Y Magnetic HD MRC UV Filter 77mm
Can be connected directly to the lens Can be used togther with H&Y Magnetic Lens Adaptor Magnetic Stackable Mounting Double-side Nano Coating Anti-reflection Water and Oil / Dust Resistant The filter blocks UV light and provides protection for the lens
Rode DS1 Overview
Key Features
- Adjustable from 11 to 15.74"
- Includes Cable Clips
- Includes 3/8 to 5/8" Adapter
The Rode DS1 Microphone Desktop Stand is designed to securely support a wide variety of microphones. The stand features an adjustable height between 11 to 15.74", and includes two cable clips and a 3/8 to 5/8" adapter.
Lindy 31397 MFI Usb to Apple Lightning 8 Pin Key Chain Grey
•Charge, sync or transfer data from your Apple device
•Apple approved, and officially licensed by Apple
•MFi certified for use with iPhones, iPads and iPods with a Lightning interface
•The length meter wire solves the charging distance problem
•180 degree adjustment
Connector (Input) : 4 Pin USB Type A Male
Connector (Output) : 8 pin Apple Lightning Male
Material of Case : Aluminum
Dimension 7.7x1.6x1cm
Color : Silver, Space Grey, Rose gold
Compatible with : "7 Plus / 7 /6s Plus / 6s / 6 Plus / 6 / SE / 5s / 5c / 5 iPad Air® / Air 2 / iPad mini™ / mini 2 / mini 3 / mini 4 / iPad Pro(9.7-inch) / iPad Pro(12.9-inch) / iPad® 4th generation / iPod nano® 7th Generation / iPodtouch 6th Generation / iPod touch 5th Generation "
Leofoto 32LS Quick Detach Tripod Strap
- 1/4"-20 Screw Fits LS 1/4" Accessory Socket.
- Quick Release Couplers are Interchangeable with QD and QDM Parts.
- Couplers Feature Built-In Swivels.
- Strap Material: Nylon Webbing.
- Coupling Material: Stainless Steel / Aluminum Alloy.
Leofoto Quick Detach Strap was designed To be used on Leofoto LS Ranger.
Features includes a 360 degree swivel, To prevent the strap entangling. And a quick press To detach strap quickly, for example using into low angles or beach.
Leofoto 28LS Quick Detach Tripod Strap
- 1/4"-20 Screw Fits LS 1/4" Accessory Socket.
- Quick Release Couplers are Interchangeable with QD and QDM Parts.
- Couplers Feature Built-In Swivels.
- Strap Material: Nylon Webbing.
- Coupling Material: Stainless Steel / Aluminum Alloy.
Leofoto Quick Detach Strap was designed To be used on Leofoto LS Ranger.
Features includes a 360 degree swivel, To prevent the strap entangling. And a quick press To detach strap quickly, for example using into low angles or beach.
Leofoto 22LS Quick Detach Tripod Strap
- 1/4"-20 Screw Fits LS 1/4" Accessory Socket.
- Quick Release Couplers are Interchangeable with QD and QDM Parts.
- Couplers Feature Built-In Swivels.
- Strap Material: Nylon Webbing.
- Coupling Material: Stainless Steel / Aluminum Alloy.
Leofoto Quick Detach Strap was designed to be used on Leofoto LS Ranger.
Features includes a 360 degree swivel, to prevent the strap entangling. And a quick press to detach strap quickly, for example using into low angles or beach.
Leofoto SP-01+DC-22Q Overview
Key Features
- Cross-Body Strap
- For Right or Left-Handed Users
- Places Camera Down against Waist
- Allows Quick and Easy Access to Camera
- Arca-Swiss-Type Dovetail Clamp
- QD Quick Disconnect System
- Automatic-Locking System
- Nylon Webbing, 70" Adjustable Length
Quickly access your camera when needed and stay mobile with this SP-01+DC-22Q QD Strap & Clamp Kit from Leofoto. The strap is designed to be worn cross-body, draped from one shoulder to the opposing hip. A connected camera can then rest on your the hip so that you can quickly raise it to shoot. The included Arca-Swiss-style dovetail clamp with QD socket allows you to quickly remove your camera and attach it to a tripod. Two 1/4"-20 tripod sockets are located on the bottom of the clamp for standard and tabletop tripod mounting.
- Durable and wear-resistant nylon webbing material
- Arca-Swiss-style dovetail clamp with QD socket for fast attachment and removal
- Two 1/4"-20 ports for direct attachment to a tabletop tripod
- Fast and convenient QD (quick disconnect) automatic-locking system
- MAGPUL compatible push button
Leofoto CF-04 Lens Foot for Canon 400mm, 600mm & 800mm Lens
The CF-04 lens replacement foot has built-in dovetail mounting light-weight, low profile, and provides the best possible stability for your lens. The CF series includes Quick detatch (QD) socket for quickly attaching a compatible strap, and maintains the 3/8" - 16, and 1/4"-20 threaded mounting holes as the factory foot, the lens foot also comes with two M3 screws for use as optional sefety stops.
Compatible :
Canon 400mm, 600mm & 800mm Lens
