SmallRig Wooden Handgrip for Sony A6500 ILCE-6500 1970 is an ergonomic wooden handgrip which gives you more convenience during handheld shooting. It is secured in place with three M4 screws. Made of one piece of handcrafted rosewood, it feels good. Adding this handgrip is certainly a good choice, which prevents your hand from uncomfortableness owing to battery overheating.

Note: The wooden handgrip is made of natural rosewood without any painting, thus the color will be a little different from the website.

Key Features :

• 1. Fits the ergonomic design
• 2. Works with handheld shooting
• 3. Locked in place with three M4 screws
• 4. Prevents your hand from uncomfortableness owing to battery overheating

Compatibility:
Sony a 6500 cage 1889
Sony a 6000/6300 cage 1661

Package Includes:
1 x Wooden Handgrip
3 x M4 Screw
1 x M4 Spanner

Product Dimensions: 49x24x66mm
Net Weight: 25g
Package Size: 85x75x24mm
Package Weight: 50g
Material(s): Wood

SmallRig 2077 Overview

The Universal Shoulder Pad with 15mm LWS Rod Clamp from SmallRig provides handheld comfort and accessory mounting for a wide Range of cameras.

This lightweight shoulder support is compatible with most mirrorless, DSLR, and small cine-style video cameras. Features include a detachable 15mm LWS rod clamp that can be front- or rear-mounted, multiple 1/4"-20, 3/8"-16, and M4 accessory threads, and several ARRI-style anti-twist accessory mounts.

SmallRig 1893 Monitor Video Devices PIX-E5/PIX-E5H MonitorKey Features:
1. Perfectly matches To your monitor and helps To dissipate heat
2. Shoe mount, side and bottom NATO rails for accessories attachment
3. Compatible with PIX-LR by adjusting the height of the cage freely.
4. Allows To mount HDMI clamp To protect the HDMI cable
5. Compatible with Video Devices original sunhood

Compatibility:
Video Devices PIX-E5/PIX-E5H Monitor

SmallRig 1891 Overview

Contoured for a comfortable grip, the Left-Side Wooden Grip with ARRI Rosette from SmallRig mounts onto your camera rig's ARRI-standard rosette.

Fasten the grip's rosette component to one of several positions on the grip to adjust its vertical position and rotate the rosette itself to your preferred tilt angle. The center M6 screw may be removed for use with a rig requiring a female thread. This lightweight Left-Side Grip is composed of rosewood and aluminum.

SmallRig 1769 Dual NATO Rail

SmallRig Double NATO Rails 1769 is a double-sided NATO rail with standard NATO system on two sides, and two safety pins on each end. It could be easily and safely attached To any NATO compatible devices, such as NATO handle, NATO rosette mount, NATO EVF bracket etc.

There are many 1/4'' and 3/8'' threaded holes for various accessoires attachment. It is multifunctional, delicate and light.

Key Features:
1. Double-sided Nato rails for NATO compatible devices
2. Two safety pins for camera attachment protection
3. 1/4 & 3/8 threaded holes for multifunctional attachment
4. Deft, lightweight and stable.

SmallRig 2013 Overview

The formfitting 2013 Cage for Sony a9 from SmallRig protects and offers accessory mounting for your Alpha a9 camera. The cage maintains access To the camera controls and features a variety of mounting options.

Multiple 1/4"-20 and 3/8"-16 threads, one cold shoe, and one integrated ARRI anti-twist thread are provided for attaching accessories. The cage single ARRI-style rosette can be used for mounting a compatible handgrip or handle. The 2013 Cage is constructed from lightweight, sturdy aluminum and includes a 1/4"-20 camera screw.

Compatibility

Sony Alpha a9 camera

SmallRig 1815 Overview

Protect and add accessories to your a7 series mirrorless camera with the 1815 Camera Cage for Sony a7/a7S/a7R from SmallRig. This formfitting cage features a variety of accessory mounting options and maintains access to both the camera's controls and hot shoe.

In addition to two cold shoes and multiple 1/4"-20 and 3/8"-16 accessory threads, the 1815 cage features several ARRI-style accessory threads for preventing accessories from twisting when mounted on the cage. A single ARRI-style rosette enables you to mount a separately available handgrip or handle. The bottom of this anti-twist cage is designed to mount onto compatible Arca-Swiss-style bases.

Compatibility

Sony a7, a7S, a7R

SmallRig 1585 Overview

The lightweight 1585 Cage for Panasonic GH4/GH3 from SmallRig is a protective frame that enables the mounting of accessories To your camera. The included cable clamp secures your camera HDMI cable, preventing accidental unplugging of the cable while shooting. One cold shoe and multiple 1/4"-20 and 3/8"-16 accessory threads are built into the cage top and sides, and a NATO rail is integrated into the right side.

The cage maintains access To the control buttons, compartments, connectors, and shoe interface when mounted on the camera. Threads on the cage bottom enable you To attach a separately available SmallRig rod system, offering additional options for expanding your camera rig.

SmallRig Cine ND Filter Overview

Key Features

• 0.3 Optical Density
• Multilayer Nano Coating
• 4mm Thick Schott B270 Optical Glass
• Waterproof and Oil-Resistant Coating
• Compatible with 4 x 5.65" Matte Boxes
• Darkens Entire Image Area
• Allows Reduced Shutter Speed
• Allows Wider Aperture

This 4 x 5.65" Cine ND Filter from SmallRig is an ND0.3 neutral density filter that produces a 1 f-stop exposure reduction, making it possible to reduce shutter speed for added blur when shooting still images, or for finer control over frame rate when shooting video. In addition, shooting at a wider aperture to reduce depth of field helps isolate the image subject from the background. This filter is compatible with any 4 x 5.65" matte box or filter holder that has a filter slot for 4mm-thick filters.

Made with high-clarity, high-transmission B270 optical glass, this filter is precisely ground and polished for use with lenses of various focal lengths without compromising image sharpness. The filter is coated on both sides with multilayer nano-coating to reduce lens flare and optimize light transmission. The coatings are also mildewproof and water resistant, toughened to prevent stains, and easy to clean, making the filter ideal for use in harsh environments.

• Compatible with 4 x 5.65" matte box systems
• 4mm thick
• For still photography and video applications
• Double-sided multilayer nano-coating
• SCHOTT B270 optical glass construction
• Waterproof and oil-resistant coating
• High-accuracy color reproduction

SmallRig 4505 Overview

Key Features

• Portable & Compact Battery Mount Plate
• Tool-Free Installation
• 11 lb Payload Capacity
• Multiple 1/4"-20 Threaded Mounting Holes
• Aluminum & Stainless Steel Construction

The compact and portable V-Mount Battery Mounting Plate from SmallRig is a versatile, all-in-one mounting solution for V-mount batteries that boasts tool-free installation and a convenient quick release system. It has multiple 1/4"20 mounting threads, an Arca-style clamp, and built-in 1/4"-20 and 3/8"-16 holes at the bottom to facilitate the attachment of other quick release plates. Constructed with aluminum and stainless steel for added durability and sturdiness, the unit can support payloads up to 11 lb.

Compatibility

Mirrorless/DSLR cameras less than 4.3" thick, such as :

• Sony a7R V, a7 IV, a7S III, a7C, FX3, and FX30
• Canon EOS R5C, R5, R6, R6 Mark II, R7, R10, R, and RP
• Panasonic LUMIX S1H, S1R, S1, S5, S5 II, GH6, and GH5

SmallRig 2837B Overview

Key Features

• Designed to Fit VCT-14 Baseplate
• Manfrotto 501 Sliding Camera Plate
• 15mm LWS Rod System
• ARRI-Style Rosettes on Sides
• Soft, Comfortable Silicone Shoulder Pad
• Multiple 1/4"-20 Accessory Threads
• 1.1" Front Clamp Vertical Adjustment
• 501 Plate Slides 3.1" Forward/Back
• Durable Aluminum Construction

Use the Shoulder Pad Pro from SmallRig to quickly switch between handholding your cinema camera and mounting it on a separately available VCT-14 tripod adapter plate. The Shoulder Pad Pro features a durable aluminum baseplate, and a comfortable, integrated silicone shoulder pad allows you to handhold your camera for long periods. The baseplate features include front and back 15mm LWS rod support, ARRI-style rosettes on both sides, and multiple 1/4"-20 accessory threads. The bottom of the plate features a V-lock-style VCT-14 wedge to mount onto an optional VCT plate.

The included Manfrotto 501 plate features measurement markings, and it slides back and forth up within a 3.1" range to balance your camera on your shoulder or rig. The front 15mm rod clamp can be adjusted vertically 1.1" to ensure the proper 15mm rod height for certain cinema cameras. The Manfrotto plate features 1/4"-20 and 3/8"-16 camera mounting screws and a flat wrench that stores under the baseplate secures the camera screws.

Note:

This shoulder plate is compatible with Sony VCT-14 tripod adapter plates but not compatible with Sony VCT-U14 plates or the Zacuto VCT tripod plate.

Camera Compatibility

Compatible with but not limited to:

• Sony FS5, FS5II, FS7, FS7II, and FX9
• Blackmagic Design Pocket Cinema Camera 6K and 4K
• Blackmagic Design URSA Mini
• Canon EOS C100, C200, C300, and C500
• Panasonic EVA-1

Accessory Compatibility

Compatible with but not limited to:

• SmallRig 9" Carbon Fiber 15mm Rods (2-Pack) 1690
• SmallRig Shoulder Rig Handle Kit 2002
• SmallRig Cheese Handle 1810

SmallRig 3403 Overview

Key Features

• Sony Grip to ARRI-Style Rosette Adapter
• Use to Relocate FX6 Handgrip
• Mount Rosette Extension or Accessory
• For Use with Extension Arms & Grips
• Rotates for Optimal Positioning
• Aluminum & Stainless Steel Construction

The Handgrip Rosette Adapter from SmallRig enables you to relocate your original Sony FX6 handgrip when using an extension arm or compatible camera cage. It can also be used to add a rosette-based accessory to the FX6's rosette mount. It secures and locks onto the camera using a cam lever.

This ARRI-style to Sony rosette adapter is made from aluminum and stainless steel and has an M6 center thread. An M6 screw is included to use with other accessories with an M6 thread, and a LANC extension cable is included to assist in relocating the original handgrip.

Note:

The extension cable must be connected before the camera is turned on or the handgrip may not work properly.

Compatibility

Sony FX6 cinema camera
ARRI-style rosette extension arm or accessory

Also compatible with but not limited to:
SmallRig Extension Arm 1879
SmallRig Extension Arm With ARRI-Style Rosette 1684
SmallRig Extension Arm with 2 x ARRI-Style Rosettes 1807
SmallRig Extension Arm with ARRI-Style Rosette 1870

SmallRig Ground Spreader for Tripod Overview

Key Features

• For SmallRig 4465/4463/3989/4167 Tripods
• Durable Plastic/Aluminum Ground Spreader
• Diameter Extends from 34.2 to 54.3"
• Center Ring Provides Quick Breakdown

Use this Ground Spreader from SmallRig with select tripods, including SmallRig's 4465, 4463, 3989, and 4167 model tripods. It is easy to adjust the length of each arm using a locking knob to telescope out each extension, and the adjustable radius of the spreader is 34.2 to 54.3".

The ground spreader is made from durable, lightweight plastic and aluminum, and a center ring provides a quick breakdown of the spreader for transport.

AD-100 Heavy-Duty Carbon Fiber Tripod Kit with DH10 Head Overview

Use the FreeBlazer Heavy-Duty Carbon Fiber Tripod from Smallrig to support a camera rig weighing up to 55.1 lb. Made of lightweight carbon fiber, it has a 75mm bowl and includes a half bowl tie-down with a 3/8"-16 screw that can be used to mount your camera, video head, or baseplate. The 2-stage legs feature flip locks for quick setup, a mid-level spreader, and both spiked and detachable wide feet. The FreeBlazer tripod can be adjusted between a minimum height of 31.1" and a maximum height of 71.7", and it folds to 39" for storage.

SmallRig FreeBlazer Heavy-Duty Carbon Fiber Tripod (75mm Bowl)

Use the FreeBlazer Heavy-Duty Carbon Fiber Tripod from Smallrig to support a camera rig weighing up to 55.1 lb. Made of lightweight carbon fiber, it has a 75mm bowl and includes a half bowl tie-down with a 3/8"-16 screw that can be used to mount your camera, video head, or baseplate. The 2-stage legs feature flip locks for quick setup, a mid-level spreader, and both spiked and detachable wide feet. The FreeBlazer tripod can be adjusted between a minimum height of 31.1" and a maximum height of 71.7", and it folds to 39" for storage.

Half Ball Tie-Down

• Use the included half ball tie-down to mount your camera, tripod head, or baseplate.
• The tie-down incorporates a 3/8"-16 screw.

SmallRig DH10 Heavy-Duty Video Head (75mm Flat Base)

Add smooth camera moves to your footage using the DH10 Heavy-Duty Video Head from Smallrig. This 75mm flat base head features stepless damping for smooth panning and 17.7 lb of counterbalance for dynamic balance. The DH10 head supports up to 22 lb and features a Manfrotto-type 501PL snap-in quick release plate for quick camera or gimbal mounting. It provides one1/4"-20 thread for mounting an articulating arm or another accessory and comes with a telescopic pan handle that can be mounted on either side of the head.

Quick Release Plate

• Includes a Manfrotto-type 501 PL quick release plate that easily snaps into place.
• Provides quick mounting for DJI RS2/3/3 Pro gimbals.

SmallRig DH10 Heavy-Duty Video Head (75mm Flat Base)

Add smooth camera moves to your footage using the DH10 Heavy-Duty Video Head from Smallrig. This 75mm flat base head features stepless damping for smooth panning and 17.7 lb of counterbalance for dynamic balance. The DH10 head supports up to 22 lb and features a Manfrotto-type 501PL snap-in quick release plate for quick camera or gimbal mounting. It provides one1/4"-20 thread for mounting an articulating arm or another accessory and comes with a telescopic pan handle that can be mounted on either side of the head.

Quick Release Plate

• Includes a Manfrotto-type 501 PL quick release plate that easily snaps into place.
• Provides quick mounting for DJI RS2/3/3 Pro gimbals.

SmallRig F60 Overview

Key Features

• Follow Focus for DSLR/Mirrorless Lenses
• Non-Damping, Forward/Reverse Switch
• 2-Step A/B Stops or 360° Rotation
• Works with Optional Standard Whip/Crank
• Composite, Aluminum & Wood Grain Design

Control your lens focus with smooth, fine adjustments using the F60 Modular Follow Focus from SmallRig. Mount this non-damping follow focus onto your rig using the included 15mm rod clamp. It is compatible with most lenses, including standard cine lenses using its 0.8 MOD gear, and it can be used with the silicone gear and lens ring along with the M0.8-43T gear for smoother focus pulls on mirrorless/DSLR lenses.

There is a 3-step A/B stop function to set direction backward or forward, or it can rotate 360° when controlling a zoom lens. The follow focus is made from durable composite and aluminum elements, and it features a wood-grain finish. The wheel is compatible with optional industry-standard whips and cranks and SmallRig accessories such as lens gears, single or dual rod clamps, and other 15mm mounting accessories.

SmallRig 4124 Overview

Key Features

• Camera Top & Side Plates
• Quick Release Baseplate
• V-Mount Plate with D-Tap Power Cable
• Horizontal & Vertical Mounting
• 1/4"-20 & 3/8"-16 Accessory Threads
• 3/8"-16 Anti-Twist Threads
• 1 x Cold Shoe Mount
• Durable Aluminum Construction

Protect and add accessories to your Sony FX6 camera with the Camera Cage from SmallRig. This lightweight, compact modular cage comprises a baseplate, side plate, top plate, V-mount battery plate, and D-Tap power cable. The quick release baseplate can be used in both the standard horizontal position and vertically for social media capture. Multiple accessories can be attached using the cold shoe mount or 1/4"-20, 3/8"-16, and anti-twist 3/8"-16 threads.

Multiple Accessory Mounts

Attach multiple accessories using the cold shoe mount, 1/4"-20 and 3/8"-16 threads, and anti-twist 3/8"-16 threads.

Dual Orientation Mounting

The modular side plate supports both horizontal and vertical mounting for social media use.

V-Mount Battery Plate

• Use the included plate and D-Tap cable to power your FX6 using a V-mount battery.
• Maintains compatibility with Sony BP-U batteries.

SmallRig AD-200 Overview

Key Features

• Professional Tripod 75mm Ball Fluid Head
• Carbon Fiber Tripod Legs
• Manfrotto Snap-In Quick Release Plate
• 22.8 to 77.2" Height Range
• Ground & Mid-Level Spreaders
• Interchangeable Spiked & Wide Feet
• 360° Panning, +90/-60° Tilting
• 6-Step Counterbalance, 4-Step Drag
• Adjustable Pan Bar, 17.6 lb Maximum Load
• Includes Carry Bag

The AD-Pro8 Professional Fluid Head Tripod Kit from SmallRig is a durable and portable video tripod system for professional photographers, videographers, and vloggers. The system includes the PH8 professional tripod fluid head and heavy-duty carbon fiber tripod legs. A carry bag is included to store and transport the entire system.

The durable fluid head features a Manfrotto 501PL-type quick release plate with a snap-in plate design, a 75mm half ball base that can support up to 17.6 lb, 6-step counterbalance, 4-step pan/tilt drag settings, 360° panning, and +90/-60° tilting. A telescoping pan handle extends from 13.8 to 20.9" in length, and it can rotate 360° on the right or left rosette.

The carbon fiber legs feature removable spiked feet, a mid-level spreader, and a ground spreader for added stability options. It allows you to extend your camera rig from 22.8 to 77.2" in height. It folds down to 38" in length for transport.

Quick Features

Lightweight professional tripod system

PH8 professional fluid head

Carbon fiber tripod legs

Manfrotto-style quick release plate with snap-in style design

75mm half ball base

360° panning, +90/-60° tilting

6-step fluid counterbalance

4-step pan and tilt fluid drag/damping

Telescoping pan handle with rosettes on left and right sides

22.8 to 77.2" height range

Removable mid-level and ground spreaders

Interchangeable flat wide and spiked feet

38" folded length

SmallRig FreeBlazer Heavy-Duty Tripod System Overview

Key Features

• Carbon Fiber Tripod + Fluid Head System
• 22 lb Load Capacity, Weighs 11 lb
• 37 to 77" Height Adjustment, 39" Folded
• DJI RS 2/RS 3/RS 3 Pro Mode Support
• 75mm Ball Head, Pan & Friction Knobs
• Mid-Level Spreader, Manfrotto QR Plate
• 1/4"-20 & 3/8"-16 Camera Screws
• 1/4"-20 Accessory Thread
• Includes Carry Bag

With a 22 lb load capacity at a weight of only 11 lb, the FreeBlazer Heavy-Duty Carbon Fiber Tripod System from SmallRig is a durable, lightweight, and portable support option for professional photographers, videographers, and vloggers. The heavy-duty tripod is constructed with durable, lightweight carbon fiber, features a mid-level spreader, and has an adjustable height range of 37 to 77". It folds down to 39" in length for transport in the included carrying bag.

The fluid head allows you to use the included Manfrotto-style quick release plate or the original DJI RS 2, RS 3, or RS 3 Pro quick release plate with the flip of a simple switch. The 75mm half ball head can pan 360° and tilt +90/-60°, and the quick release plate features 1/4"-20 and 3/8"-16 camera screws to accommodate all camera types. Other features include a bubble level, 1/4"-20 accessory threads, and a fixed pan bar. It also features removable rubber feet and spiked feet to fit various settings.

SmallRig FreeBlazer Heavy-Duty Carbon Fiber Tripod (75mm Bowl)

Use the FreeBlazer Heavy-Duty Carbon Fiber Tripod from Smallrig to support a camera rig weighing up to 55.1 lb. Made of lightweight carbon fiber, it has a 75mm bowl and includes a half bowl tie-down with a 3/8"-16 screw that can be used to mount your camera, video head, or baseplate. The 2-stage legs feature flip locks for quick setup, a mid-level spreader, and both spiked and detachable wide feet. The FreeBlazer tripod can be adjusted between a minimum height of 31.1" and a maximum height of 71.7", and it folds to 39" for storage.

Half Ball Tie-Down

• Use the included half ball tie-down to mount your camera, tripod head, or baseplate.
• The tie-down incorporates a 3/8"-16 screw.

SmallRig DH10 Heavy-Duty Video Head (75mm Flat Base)

Add smooth camera moves to your footage using the DH10 Heavy-Duty Video Head from Smallrig. This 75mm flat base head features stepless damping for smooth panning and 17.7 lb of counterbalance for dynamic balance. The DH10 head supports up to 22 lb and features a Manfrotto-type 501PL snap-in quick release plate for quick camera or gimbal mounting. It provides one1/4"-20 thread for mounting an articulating arm or another accessory and comes with a telescopic pan handle that can be mounted on either side of the head.

Quick Release Plate

• Includes a Manfrotto-type 501 PL quick release plate that easily snaps into place.
• Provides quick mounting for DJI RS2/3/3 Pro gimbals.

SmallRig Freespeed Travel Tripod Overview

Key Features

• Load Capacity: 17.6 lb
• Working Height Range: 5.1 to 59"
• Folded Length: 19.3"
• Inverted Ball Head with Arca-Type QR
• 4-Section Carbon Fiber Legs, Twist Locks
• Three 1/4"-20 Accessory Threads
• Weight: 2.98 lb

The FreeRover Carbon Fiber Photo Tripod Kit AP-100 from SmallRig is a compact, carbon fiber tripod designed with travel photographers in mind. The legs feature a quick-tightening design, allowing for easy and efficient setup by tightening a single knob to lock all four sections. The 1.2mm thick, carbon fiber material used for the legs and center column ensures a lightweight design without compromising stability or load-bearing capacity. The center column features a quick-lock buckle for rapid height adjustment, plus a quick-detach hook on the bottom for convenient attachment and removal of camera equipment. Additionally, the center column has a removable, short-column function, providing down to a 5.1" height for low-angle shooting. The tripod includes an inverted ball head, allowing for a more compact and portable design when folded, due to its recessed structure. The head's Arca-type quick release features a rotating disk design without visible knobs, providing a sleek and minimalist appearance. The ball head is secured by a quick-lock buckle, allowing photographers to quickly and conveniently lock the ball head in place. With a load capacity of 17.6 pounds, the ball head can support DSLR and mirrorless cameras with lenses in the medium to telephoto range. Near the connection points of the tripod's legs are three 1/4"-20 threaded holes, allowing for the attachment of accessories such as a magic arm, a microphone, a monitor, or an image transmitter.

• Inverted ball head
• Sleek quick release receiver disk design without visible knobs
• Independent leg spread
• Three locking leg angles: 23°, 55°, 83°
• Three 1/4"-20 threaded accessory holes
• Removable rubber feet with steel spikes

SmallRig 1891 Overview

Key Features

• Wooden Handgrip for Left Side of Rig
• Natural Rosewood Construction
• Up/Down & Angle Adjusting via 2 Screws
• Mounts via ARRI-Standard Rosette
• Contoured, Ergonomic Design
• Male/Female Design with Removable Screw

The Left-Side Wooden Grip with ARRI Rosette from SmallRig mounts on your camera cage or rig's ARRI-standard rosette and is contoured for a comfortable grip. This revamped grip can now be adjusted vertically and at three angles using just two screws and the Allen wrench tucked in the bottom of the grip.

Attach this lightweight grip using the captive thumbscrew or remove the center M6 screw for use with a rig requiring a female thread. The rosewood grip stays comfortable even in cold weather, and the aluminum hardware helps reduce the overall weight.