Convert your MoveLink TX into a handheld microphone with the ML-H from Godox. The smartly designed handle simply slides into the belt clip on the TX (available separately) and allows you to use the microphone/transmitter for wireless man-on-the-street interviews and on-scene video reports.
A foam windscreen is included to reduce breath and wind noise. The 1/4"-20 thread on the bottom lets you attach the ML-H to a small stand (available separately) for tabletop use.
Key Features
The Sony ECM-W2BT brings vloggers, YouTubers, journalists, and content creators using Sony cameras with digital MI interfaces a flexible and easy-to-use true-wireless microphone system featuring advanced Bluetooth technology for high-quality audio and reliable, low-latency performance.
The miniature clip-on transmitter with a built-in omnidirectional microphone makes it fast and easy to mic up your subject for a quick interview without having to worry about a cable. The transmitter also features a stereo 3.5mm audio input, allowing you to connect a smaller, more discreet lavalier such as the ECM-LV1 (available separately) if desired.
The compact receiver attaches directly to the MI shoe mount on compatible Sony cameras, giving the system up to 9 hours of shooting time, assisted by the camera's power. Both the transmitter and receiver are powered via built-in rechargeable lithium-ion batteries; without an MI connection the system will operate for up to 3 hours between charges. If the camera's MI shoe is also equipped with a digital interface, the direct connection allows the camera to record pristine sound with an ultra-low noise floor.
A smart feature is the addition of a built-in microphone on the receiver unit, along with a 3-setting switch allowing you to pick up audio from either the subject at the transmitter, the camera operator at the receiver, or both at the same time for interviews. The receiver also features a 3.5mm output for connection to traditional DSLR/mirrorless cameras and a 3.5mm TRS cable is supplied along with a USB cable and a windscreen for the transmitter/mic.
Key Features
Designed for vlogging, YouTube videos, and content creation, the black Sony ECM-LV1 is a compact stereo lavalier microphone with a 3.3' cable and 3.5mm TRS connector for use with cameras and wireless transmittersâincluding the Sony ECM-W2BT Camera-Mount Bluetooth Wireless system. The lav features two omnidirectional capsules that each pick up sound in a 360° radius, resulting in stereo audio capture.
The low-profile mic is only 32mm in length and 11mm in diameter, while the included 360° rotatable clip offers flexible options for discreetly attaching the mic to clothing. The electret-condenser capsule is powered by plug-in power from your camera, voice recorder, or transmitter, so a battery is not required. The included foam windscreen helps reduce wind noise for cleaner recordings.
The Rode VideoMic NTG gives video content creators, run-and-gun filmmakers, voiceover artists, and podcasters the sound of the highly regarded NTG shotguns in a convenient camera-mount mic that requires no additional adapters To work with cameras, smartphones, tablets, portable recorders, and USB-equipped computers.
with focused directivity, continuously variable gain, digitally switched tone controls, and an internal USB-rechargeable battery, the VideoMic NTG provides transparent sonic performance and immensely flexible functionality. Thanks To its aerospace-grade aluminum housing, the VideoMic NTG is durable, compact, and lightweight, making it equally at home atop a camera or on a boompole.
The auto-sensing 3.5mm TRRS output and included TRRS cable ensure compatibility with cameras, portable recorders, mobile devices, and computersno adapters required. A peak warning light, a -20 dB pad, and the Selectable -20 dB safety channel help you easily avoid distortion in your recordings. When used as a USB microphone, the 3.5mm jack functions as a stereo headphone output for real-time monitoring of your signal.
Thanks To firmware version 2.0, the VideoMic NTG is now MFi-certified for use with Lightning-equipped Apple iOS mobile devices (iPhone, iPad, and iPod) when paired with the Rode SC15 USB Type-C To Lightning accessory cable (available separately).
The VideoMic NTG body features acoustic perforations rather than the linear slots traditionally used in shotgun microphones. This annular line tube technology was ported from Rode NTG5 To deliver transparency and a natural, uncolored sound.
The VideoMic NTG utilizes a supercardioid polar pattern To focus on sound in front of it while attenuating sound from the sides and rear. Its low-noise electronics and sensitive condenser element deliver more detailed audio than the mics typically found in cameras and portable recorders. Since it is even more sensitive than the VideoMic Pro+ model, it requires less gain To achieve an equivalent signal level.
Simply connect the VideoMic NTG To your camera, portable recorder, or mobile device via the included TRRS cable. The VideoMic NTG auto-sensing 3.5mm TRRS output automatically switches between TRS and TRRS as necessary, so you won't need additional adapter cables. The 3.5mm jack is wired in a dual-mono configuration, ensuring that the mic signal is sent identically To both input channels of your recording device.
Plug the VideoMic NTG into your computer, smartphone, or tablet via USB To use it as a digital USB microphone for direct recording To your favorite software. Its integrated analog-to-digital converter operates at 24-bit / 48 kHz To provide full-resolution, uncompressed audio quality.
As of firmware version 2.0, the VideoMic NTG is officially MFi-certified, unlocking complete compatibility with Lightning-equipped iOS devices, including iPhone, iPad, and iPod. Plug your VideoMic NTG into your iPhone, iPad, or iPod via USB with the Rode SC15 USB Type-C To Lightning accessory cable (available separately), unleashing the full potential of the mic, including:
When using the VideoMic NTG as a USB microphone, plug your headphones into its 3.5mm output for convenient stereo headphone monitoring. Control the headphone volume via the gain knob on the bottom of the mic.
To enable effortless optimization of recording levels for any device, the VideoMic NTG boasts a continuously variable gain control and a helpful audio peak warning light. Whether you need mic level, line level, headphone level, or something in between, the right level is available at the turn of a knob. Press the dedicated button for the -20 dB pad To quickly lower the level when loud sound sources threaten To distort your recording.
The high-pass filter can be set To 75 Hz or 150 Hz To roll off low-frequency noise from common sources such as air conditioners and traffic. Knowing that intelligibility is crucial, Rode outfitted the VideoMic NTG with a Selectable high-frequency boost, which enhances detail and clarity in the treble Range.
When source levels get unexpectedly louder, you risk overloading the recording. By pressing the dedicated safety channel button, you can set the mic right channel To output 20 dB lower than the left channel. This lets you record a safety channel and the main signal To your camera at the same time.
The internal rechargeable lithium-ion battery offers up To 30 hours of run time and recharges via USB Type-C in about two hours. Since the VideoMic NTG can be charged while you use it, you can even simultaneously power and charge it with a USB battery pack.
When connected To the mic input of a compatible camera, the VideoMic NTG automatically turns on or off in response To the presence or absence of plug-in power. As you'd expect, the mic shuts off when it detects a loss in power, either from powering off or disconnecting the camera. Plus, there is a power button for manually turning the mic on or off.
Understanding that the rubber bands used in many shockmounts can snap and stretch, Rode chose To opt for a rugged Rycote Lyre suspension-style shockmount designed for attachment To a camera or boompole. This simplifies setup of the mic and inhibits the transfer of vibrations from the camera. The shockmount sliding rail system lets shift the position of the mic forward or backward for perfect placement. forget about messy cabling the built-in cable management keeps the cord run tidy.
The VideoMic NTG includes a foam windscreen To minimize unwanted wind noise from light breezes, fans, heaters, and air conditioners. for maximum reduction of wind noise in outdoor environments, consider a furry windshield such as the optional Rode WS-11.