Beike TX1 Tripod Monopod 3 in 1 Flatlay Multifunction

• Material : Aluminium Alloy
• Pegangan : Rubber 2 sisi
• Ballhead 360 °
• Panjang terlipat : 44 cm
• Tripod max tinggi: 184 cm
• Tinggi max monopod: 108 cm
• Jumlah kolom: 4 bagian
• Max. diameter tabung: 25mm
• Beban kapasitas: 8 kg
• Berat : 1856g

Beike TX1 adalah sebuah kamera tripod yang inovatif dan dapat diandalkan, dirancang untuk memenuhi kebutuhan fotografer dan videografer profesional. Dengan kombinasi yang sempurna antara desain yang kuat dan fleksibilitas yang tinggi, tripod ini menjadi pilihan ideal untuk pengambilan gambar yang stabil dan presisi.

Leofoto MPG-01S Overview

Key Features

• Load Capacity: 22 lb
• Arca-Type Clamp
• 3/8"-16 Mounting Base
• Aluminum Construction

The MPG-01S Monopod Head Side Mount with Lever Release Clamp from Leofoto attaches to compatible monopods via a 3/8"-16 female thread at the base. The base is also Arca-compatible and can be mounted by quick release on Arca clamps. This compact monopod head provides an Arca-type dovetail at a 90° tilt angle and offset to the side. It's ideally suited to mounting a camera via an Arca-type lens foot. The load capacity is 22 lb.

Fotopro AK-86N Monopod

Fotopro produces several models of monopods to suit photographers with differing needs. All are finely crafted and machined to very highstandards.

The Eimage MA800 monopod is an ideal, portable solution for on-the-move shooters using DSLR, Camcorder, and mirrorless cameras. While the MA800’s aluminum construction is durable, it allows for a more cost friendly budget. The flip lock design on the MA800 has a high locking torque while still providing ease of use, which makes for quick and reliable adjustments on the go. with a spread of 16″ the MA800’s base serves as a mini tripod that delivers reliable stability.

The aluminum MA800 Monopod rises to a maximum height of 213cm and folds down to a compact 80cm for storage and transport. The monopod has an ergonomic grip on its upper section and can support up to 20kgs on its own or 4kgs with its included fluid head. The 630FH head has fluid pan and tilt, variable drag and a quick release plate.

Vanguard Alta SP

The Alta SP Sleeve Pad is a simple and resourceful accessory that was created by our users and for our users!
This well-padded non-slip sturdy sleeve is a €˜must have€™ addition for anyone using a tripod or monopod on a regular basis. Once connected to the tripod/monopod leg one need never take it off and it will always be there adding a layer of comfort and security when slinging your gear over your shoulder and moving from one location to the next.

iFootage Cobra 2 Strike (A150)

With a four-part design that enables several possible arrangements, theCobra 2 StrikefromiFootageis a telescopic monopod made with versatility in mind. Its main component is a three-section aluminum column, which extends and retracts via a twist lock. Complementing it is a quick release camera mount at the top, and a low-angle support pod and removable rubber foot at the bottom. Together these pieces support equipment up To 17.6 lb and allow for 90° tilting that is useful for low angle shots.

When all its parts are connected and the column is extended, the monopod weighs 3 lb and reaches a maximum height of 59.1" that is useful for general work it can be collapsed down To 31.9" To reach lower angles or for easy transport. Having the bottom pod connected allows you To use its metal feet at three different angles for independent support, freeing your hands To perform other tasks. Switching that pod for the rubber foot transforms the Cobra 2 Strike into a regular monopod, while getting rid of the column and connecting the camera mount directly into the pod makes for a fixed support that is great for getting low angle shots.

The top section of the monopod is a quick release mount, which can be easily inserted or detached via a sliding lock. Its screw is composed of a 3/8"-16 thread around the outside, which is an independent part and can be pushed down To reveal a 1/4"-20 inner thread. This reversible design makes the Cobra 2 compatible with a large range of photo and video gear. Included with the product is a carrying bag so you can safely transport all its parts between shoots.

Fotopro X-GO Tripod with FPH-42Q Ball Head Overview

Key Features

• Load Capacity: 17.6 lb
• Maximum Height: 56.8"
• Minimum Height: 7.6"
• Leg Sections: 5
• Carbon Fiber-Constructed Legs
• Reverse-Folding Legs
• Variable Leg Angles
• Twist Leg-Locking System
• Detachable Leg Converts into Monopod
• Arca-Type 42Q Ball Head with Plate

The black Fotopro X-GO Tripod Kit is a 5-section carbon fiber support that has a twist lock leg system that allows, along with the rapid center column, for a maximum height of 56.8". Splaying the legs completely out enables the tripod to go as low as 7.6", and the variable leg angles allow the tripod to conform to uneven terrain. This tripod includes the Arca-type FPH-42Q ball head, which can hold cameras that weigh up to 17.6 lb with its quick release plate. The head has two separate knobs, one that controls the movement of the ball, which can be positioned at a 90° angle, and a second knob controls the 360° pan. A bubble level is included to help you to have a leveled horizon. One of the tripod's legs is removable, so it can convert into a working monopod. This enables you to have a camera support when a tripod cannot enter certain areas. Additionally, the legs fold in the reverse making it compact for storage or to transport.

Fotopro UFO Mogo Basic Flexible Monopod - Black Red

This Unique Mogo is built around the revolutionary new monopod: with a weight of only 0.168KG (Lighter than the iPhone X), Max. The load is 0.8 KG, pack size is 45.5cm, is the best choice for traveling light. You can catch more scape during trip instead of bringing lots of heave and tedious devices

High-density rubber-coated Robust legs which make it more sturdy, more durable and better the skid resistance, then you can bend it in any place like bicycle, trees, tripod, or even hang on the rear view mirror To navigation with a phone or as a tachograph holder, it also can be used in water

The Mogo is designed with two 1/4 universal screw-head, two different phone Click, removable mount, and each kit arrives with a GoPro Screw, allowing you To attach any device you own To your Mogo and expand its utility with the additional gear included in each kit

The head of the tripod is supporting 180‚°horizontal swivel through the angle button you can shot different angle you need during your trip. Allowing you To capture different angles on your trip, provide more material for Post-Production

Procore K-3 C Stand Grip Arm Overview

Procore K3 Tripod, Monopod & Mount Stand - Silver is the ultimate light stand of choice for professionals. Made of stainless steel. Offers great flexibility for flash, studio light, flags and other studio equipment. This stand comes with a boom and two grip heads for attaching the boom and other accessories, and is equipped with wheels for easy portability. Besides, sturdy, retractable & flexible. This Light Stand has a function to support the light/flash and can be used both indoors and outdoors. Suitable for those of you photographers who have lights with heavy loads.

Procore K-1 C Stand Grip Arm Overview

Procore K-1C Tripod, Monopod & Mount Stand - Silver merupakan ultimate light stand pilihan profesional. Terbuat dari bahan stainless steel. Menawarkan fleksibilitas yang besar untuk flash, studio light, flag dan peralatan studio lainnya. Stand ini hadir dengan boom dan dua grip head untuk memasang boom dan aksesoris lainnya. Selain, kokoh, retractable & fleksibel. Light Stand ini memiliki fungsi untuk menyangga lampu/flash dan dapat digunakan baik untuk indoor ataupun outdoor. Cocok bagi anda para fotografer yang memiliki lampu dengan beban berat.

Procore K-3 C Stand Grip Arm with Wheel Overview

Procore K3 Tripod, Monopod & Mount Stand - Silver is the ultimate light stand of choice for professionals. Made of stainless steel. Offers great flexibility for flash, studio light, flags and other studio equipment. This stand comes with a boom and two grip heads for attaching the boom and other accessories, and is equipped with wheels for easy portability. Besides, sturdy, retractable & flexible. This Light Stand has a function to support the light/flash and can be used both indoors and outdoors. Suitable for those of you photographers who have lights with heavy loads.

Fotopro X-go HR PRO Flat Lay Tripod

Key Features

• 4-Section Tripod
• Removable Leg Works as a Monopod
• Horizontal/Upside-Down Center Column
• Ball Head with Quick Release Plate
• 33 lb Payload
• Bubble Levels

The Fotopro X-go HR PRO Flat Lay Tripod can be used in multiple different ways so that you can shoot the standard way, horizontally, or upside down. It can be set up as a regular tripod, or one of the legs can be removed and used as a height-adjustable monopod, with the included ball head mounted on top of it. When the X-go is used as a standard tripod, the center column can be set up vertically, horizontally, or upside-down.

Fotopro SJ-85 Holder

Fotopro SJ-85 Kamera Holder adalah kamera holder yang berfungsi untuk menahan ponsel saat menggunakan tripod atau monopod agar pengambilan foto maupun video lebih stabil. Holder ini kompatibel dengan semua smartphone dengan peluru karet lunak untuk menlindungi ponsel dari goresan dan meningkatkan gaya gesek untuk mencegah ponsel terjatuh.

Fotopro KZ-1 Speedy Locker Quick Relese Plate

Features
i-Speedy Locker KZ-1
Quickly switch devices in 1 second

For hand-held, tripod, stabilizer, monopod, slider can one-stop quick swop solution of any mode, no need to turn the quick release plate knob and take out. At the same time, it is suitable for alternate use of DSLR, Gopro camera and other equipment. Seamless docking improves efficiency.

Peak Design Everyday Zip 15L Overview

Key Features

• Versatile, Light-Duty Backpack
• Clamshell-Style Opening
• Foldable, Multi-Configuration Dividers
• Organizational Pockets
• 13" Laptop Pocket
• 2 Bottle Pockets/Tripod, Monopod Holders
• Anchor Link Key Tether
• 3 Exterior Handles, Weather Resistant

This 15L, black Everyday Backpack Zip from Peak Design is a versatile, light-duty bag for photographers or multimedia creators, and can serve as a stylish way to carry any personal items that can be placed within it. Complete access to the main compartment is enabled by a zippered, clamshell opening. The zipper travels up both sides of the Everyday Backpack Zip and angles toward the wearer at the top of the bag. Even when partially opened, this angled zipper allows the main compartment to be easily reached whether through the top, or along either side of the Everyday Backpack Zip. Two adjustable dividers allow items to be stacked within the main compartment. The dividers feature foldout surfaces that can be configured to cushion and hold items against the sides of the bag, providing the ability to ensure which items can be most quickly accessed when the Everyday Backpack Zip is rotated from one's back to front with either side facing upward.

When this Everyday Backpack Zip is worn, a zippered sleeve with a dedicated pocket for a 13" laptop rests behind the shoulders. To store and organize batteries, memory cards, small electronics, or personal items, the inside surfaces of each of the side openings include a both a slip pocket and a zippered pocket. Along the exterior of the side openings are two large open pockets that can each hold a water bottle, tripod, or monopod; any one of which can be secured using the included external carrying straps with the gear loops located above each pocket. With the additional gear loops distributed along the surface of the Everyday Backpack Zip, the carrying straps allow equipment, accessories, or packable clothing to be fastened against the bag's front panel.

The Everyday Backpack Zip can be carried using the wide, built-in handles along its top and sides, or by its adjustable shoulder straps. For heavy loads, this bag's sternum strap can be used to more evenly distribute the weight being carried. The rear panel which otherwise rests against the wearer's back features an integrated luggage pass-through, allowing this bag to be mounted onto a rolling case's telescoping handle for added convenience.

Featuring a durable nylon construction, the Everyday Backpack Zip is built to be weather resistant. To further protect its contents should the bag be placed on a wet surface, the bottom panel is waterproof.

Capacity

• Versatile, 15L light-duty backpack for photographers or multimedia creators, and can serve as a stylish way to carry any personal items that can be placed within it
• Zippered sleeve for a 13" laptop
• Two large, open exterior pockets that can each hold a water bottle, tripod, or monopod with included external carrying straps
• External carrying straps allow equipment, accessories, or packable clothing to be fastened against the bag's front panel
• Key tether with Peak Design Anchor Link

Fit and Handling

• Complete access to the main compartment is enabled by a zippered, clamshell opening that angles toward the wearer at the top of the backpack
• Angled clamshell opening allows the main compartment to be easily reached whether through the top or sides
• Two included dividers allow items to be stacked within the main compartment
• Dividers also feature foldout surfaces that can be configured to cushion and hold items against the sides of the bag
• Durable, weather-resistant zippers for side openings with large pulls that can be locked against adjacent gear loops for security
• Adjustable shoulder straps pivot where they connect to the bag to help maximize comfort
• Quick-connecting, stowable sternum strap can be used to more evenly distribute the weight being carried
• Separately-available waist belt helps to prevent the bag from unintentionally shifting around the wearer such as when traveling over rough or uneven terrain
• Rear panel's elevated structure optimizes air circulation, minimizing perspiration in warm and hot environments
• Wide, built-in carry handles along top and both sides
• Integrated luggage pass-through for convenient mounting to a rolling case's telescoping handle
• Durable, weather-resistant nylon construction with waterproof bottom panel

Fotopro TL-1000 Tripod Light

Fotopro is an award-winning global brand that designs, manufactures, and markets a wide Range of photographic equipment for professional photographers. Our product line includes an extensive Range of camera tripods, monopods, heads, and accessories.

Fotopro has been recognized as one of the top photography brands in Asia and Europe over the past 15 years and we're excited to finally launch the Fotopro brand in the U.S. including North and South America. We pride ourselves on providing the very best customer support possible and we continually invest in the latest technology to assess our product Range,production needs, and consumer trends. We maintain the highest standard of quality in our products while still offering an affordable solution to our customers.Our mission is to provide photographers with the right tools to unleash their creative potential.

Vanguard VEO3+263AB160S Overview

Key Features

• Versatile Multi-Angle Central Column
• Vertical/Horizontal/360° Column Rotation
• VEO+MA1 Second Mounting Platform
• 5" Low-Angle Height
• 68" Maximum Height
• 33 lb Payload
• One Leg Converts to Monopod
• Includes Spiked Feet
• Removable Hook
• Carry Bag Included

This Aluminum Tripod Kit from Vanguard includes the compact and lightweight VEO 3+ 263AB tripod and the VEO BH-160S ball head. The tripod features a multi-angle central column that can be rotated 360° into vertical, horizontal, and slanted positions. When the column is set up horizontally, the ball head can be set up on one end, and an included VEO+MA1 Multi-Mount Adapter can be attached on the other end to support a second camera or other device. The Multi-Mount Adapter is a second mounting platform with mounting screws.

The tripod supports up to 33 lb and adjusts to a maximum height of 68" when the central column is raised up, or to 58" with the column lowered. The tripod legs open to three leg angles, 23, 50, and 80°, with the lowest one positioning the tripod at just 5" above ground for extremely low-angle shots and time lapse capture. The folded height is 30.5".

Additional Features

3 leg sections

One leg can be converted for use as a monopod

Twist leg locks

Non-slip, all-weather grips on two legs

Native rubber feet

Spiked feet, tripod bag, and Allen key included

Removable hook for hanging sandbags/other weights for additional stability

26mm leg diameter

5.5 lb weight

Vanguard VEO 3+ 263AB Tripod Overview

Key Features

• Load Capacity: 33 lb
• Height Range: 4.9 to 67.9"
• Folded Length:29.9"
• VEO BH-160 Ball Head
• 3-Section Aluminum Legs, Twist Locks
• Removable Leg Converts to Monopod
• Weight: 5.4 lb
• Includes Arca-Type Compatible QR Plate

The versatile VEO 3+ 263AB Aluminum Tripod with VEO BH-160 Ball Head from Vanguard is a 67.9-inch tall, feature-laden tripod. The VEO 3+ tripod's innovative Multi-Angle Central Column (MACC) system allows the center column to move at angles from from 0- to 180-degrees in variable vertical and horizontal positions, beyond the range of conventional lateral center columns. The included column ballast hook helps keep the tripod stable even at full extension, and the VEO+MA1 multi-mount adapter provides an additional 1/4" mount for an additional camera, a monitor, microphone, light, or other accessory. The center column may also be removed and combined with one leg to form a full-featured monopod for situations where a tripod is inconvenient.

With the press of an ergonomically positioned thumb-release button, the aluminum legs independently open to three positions to level the tripod on uneven terrain, and to spread fully for floor-level positioning. The legs feature removable rubber feet, and a set of steel spike feet is included for use in icy conditions.

• MACC multi-angle lateral center column
• Included VEO+ MA1 adaptor
• Center column converts to monopod
• Removable ballast hook
• Three adjustable leg angles: 23, 50, 80° with innovative thumb button lock
• Grip and go with non-slip, all-weather grips on two legs
• Arca-type quick release plate compatibility

Manfrotto XPRO Overview

Key Features

• Load Capacity: 17.6 lb
• Max Height: 79.9"
• Closed Length: 30.7"
• Sections: 4
• Weight: 4.6 lb
• Full Fluid Base
• Quick Power Flip Locks
• D-Shaped Anti-Twist Tubes
• Rubber Grip, Wrist Strap

The MVMXPRO500 XPRO Monopod from Manfrotto is a 4-section aluminum video support equipped with Manfrotto's FLUIDTECH base and a 500-series fluid tilt head.

A versatile kit for nearly any videographer or filmmaker, the MVMXPRO500US can often travel places tripods cannot, providing additional stability and supporting heavy equipment when required. The 4-section design, paired with an aluminum construction, results in an easy-to-transport setup weighing just 4.6 lb. With a maximum height of 79.9" and a minimum height of just 30.7", the MVMXPRO500US can be adjusted to suit users of varying heights and for various different tasks.

While the design of a monopod is relatively simple, the Manfrotto Monopod+ line utilizes some innovative features which make using the MVMXPRO500US fast and easy. The primary feature of the line is the inclusion of Manfrotto's patented Power-Lock flip locks which snap open and closed to ensure fast operation and a tight, unyielding lock. The D-shaped leg sections have been designed not only to compliment the Power-Locks but also to prevent unwanted twisting between leg sections and increase the stability of the monopod. The integrated FLUIDTECH base utilizes a "3D" fluid cartridge which facilitates smooth pans and tilts from a single connection point. The cartridge may be locked vertically to isolate movement to only the 360° panning axis, allowing for smooth, level, uninterrupted rotation. While engaging the vertical lock may allow the monopod to stand, it does not support free-standing function and should not be left unattended when not in use.

The MVMXPRO500US also includes a modified 500 series fluid head which allows the user to tilt their camera forward and backward on a counter-balanced mechanism. The head may be used while moving freely or locked in place via a side-mounted knob. Control of the head is facilitated by a single, long control arm which may be adjusted to the height of the user. A 500-series quick release plate is also included, allowing for quick vertical mounting and dismounting of your camera or camcorder.

Additionally, the Monopod+ line also features Manfrotto's standard rubber leg warmer for an improved grip and an adjustable hand strap for extra security. A 1/4"-20 and 3/8"-16 mounting thread is provided under the 500 series head should the user choose to use the monopod without a head for direct camera mounting.

Fotopro X-GO Max with FPH-62 Ball Head Overview

Key Features

• Load Capacity: 25 lb
• Maximum Height: 67.6"
• Minimum Height: 18.4
• Leg Sections: 4
• Carbon Fiber-Constructed Legs
• Reverse-Folding Legs
• Variable Leg Angles
• Twist Leg-Locking System
• Detachable Leg Converts into Monopod
• Arca-Type 62Q Ball Head with Plate

The black Fotopro X-GO Max Tripod Kit is a 4-section carbon fiber support that has a twist lock leg system that allows, along with the rapid center column, for a maximum height of 67.6". Splaying the legs completely out enables the tripod to go as low as 18.4", and the variable leg angles allow the tripod to conform to uneven terrain. This tripod includes the Arca-type FPH-62Q ball head, which can hold cameras that weigh up to 26 lb with its quick release plate. The head has two separate knobs, one that controls the movement of the ball, which can be positioned at a 90° angle, and a second knob controls the 360° pan. A bubble level is included to help you to have a leveled horizon. One of the tripod's legs is removable, so it can convert into a working monopod. This enables you to have a camera support when a tripod cannot enter certain areas. Additionally, the legs fold in the reverse making it compact for storage or to transport.