Improved processing, greater versatility, but familiar in design, the Nikon Z 7II takes everything that was great from the original and ups its capabilities even more. Sporting a high-resolution 45.7MP FX-format BSI CMOS sensor and dual EXPEED 6 image processors, the Z 7II is clearly aimed at the detail-obsessed image-maker.
The sensor design omits the optical low-pass filter for greater detail recording capability and the sensor supports a native sensitivity range down To ISO 64 for lush, rich capture. Updated processing also yields faster speeds, including a quickened 10 fps continuous shooting rate and deeper buffer for working with moving subjects. UHD 4K 60p video is supported, too, with the option To record externally in 10-bit using N-Log or HLG (HDR) modes). The sensor also incorporates a 493-point phase-detection AF system, which now supports Eye-Detect AF in Wide-Area AF modes and during movie recording, and permits focusing in low-light down To -4.5 EV. Additionally, 5-axis in-body Vibration Reduction helps To reduce the appearance of camera shake with any mounted lens.
Balancing the imaging, the Z 7II retains its overall physical design, however it has been updated with a new dual memory card slot interface To hold one CFexpress Type B card and one SD UHS-II card for more flexible storage. Both a high-res 3.6m-dot OLED EVF and rear 3.2" 2.1m-dot tilting touchscreen LCD lend versatility To image composition and playback, and SnapBridge wireless connectivity can be used for remote camera control, image sharing To a mobile device, and even over-the-air firmware updates.
Improving upon their initial efforts, Nikon has revised the Z 7 platform To offer more speed, faster processing, and greater versatility without sacrificing the beloved qualities of the original camera.
A 45.7MP BSI CMOS sensor is used for high-resolution shooting, impressive low-light quality, and fast readout speeds To benefit continuous shooting, movies, and time-lapse recording. The back-illuminated design of the sensor affords noticeably clean high-sensitivity output and reduced noise when working at high ISO values, up To a native ISO 25600, as well as vivid and smooth quality at sensitivities as low as ISO 64. The sensor design also omits the conventional optical low-pass filter in order To achieve the greatest sharpness and resolution from the sensor. Benefitting the sensor are dual EXPEED 6 image processors, which affords a wealth of speed throughout the camera system, including the ability To shoot continuously at 10 fps for up To 50 consecutive frames.
Utilizing the sensor and processor attributes for more than just still imagery, the Z 7II is also a more-than-capable multimedia camera. UHD 4K video recording is possible up To 60p and Full HD 1080p video recording is also supported at up To 120p for slow motion playback. Video files can be saved To the in-camera memory cards or as an uncompressed file To an optional external recorder via HDMI out.
Advanced video functionalities have been added with the Z 7II, including the N-Log gamma for capturing flat-looking footage that maximizes dynamic range and HLG (HDR) for recording HDR-ready footage. Other additions are the ability To output high-quality 10-bit data over HDMI and an Electronic VR function for smooth handheld shooting. Focus Peaking can be used To benefit manual focus control and a Zebra Stripes option is also available To help detect over-exposed areas within the frame. Audio recording can be handled using the built-in stereo microphone or an optional external mic can be added via the 3.5mm stereo jack for greater control over quality, and live monitoring is possible via the headphone jack.
Located on the sensor is an array of 493 phase-detect autofocus points covering 90% of the image area both vertically and horizontally. This provides fast and accurate focusing for both stills and video and with a wide coverage area, subject tracking will work out To near the edges of the frame. Hybrid AF is available for video, which will automatically switch between phase- and contrast-detect systems To provide smooth focus during shooting. Additionally, the latest NIKKOR Z lenses are optimized for silent operation.
In-body 5-axis sensor-shift Vibration Reduction compensates for up To 5 stops of camera shake regardless of the Z-type lens being used. This system also works with adapted F-mount lenses, when using the optional FTZ Adapter, where 3-axis stabilization is used.
Included with the camera body is the standard zoom NIKKOR Z 24-70mm f/4 S lens, which covers a wide-angle To portrait-length range and features a constant f/4 maximum aperture. The optical design incorporates one aspherical element as well as a unique aspherical extra-low dispersion element both of which help To greatly reduce a variety of aberrations and distortion for high sharpness and accurate color rendering. A Nano Crystal Coating is also used To control flare and ghosting for increased contrast in strong lighting conditions. Suiting both photo and video applications, a stepping AF motor is also featured for smooth, near-silent autofocus performance.
Key Features
Improved processing, greater versatility, but familiar in design, the Nikon Z 7II takes everything that was great from the original and ups its capabilities even more. Sporting a high-resolution 45.7MP FX-format BSI CMOS sensor and dual EXPEED 6 image processors, the Z 7II is clearly aimed at the detail-obsessed image-maker.
The sensor design omits the optical low-pass filter for greater detail recording capability and the sensor supports a native sensitivity Range down To ISO 64 for lush, rich capture. Updated processing also yields faster speeds, including a quickened 10 fps continuous shooting rate and deeper buffer for working with moving subjects. UHD 4K 60p video is supported, too, with the option To record externally in 10-bit using N-Log or HLG (HDR) modes). The sensor also incorporates a 493-point phase-detection AF system, which now supports Eye-Detect AF in Wide-Area AF modes and during movie recording, and permits focusing in low-light down To -4.5 EV. Additionally, 5-axis in-body Vibration Reduction helps To reduce the appearance of camera shake with any mounted lens.
Balancing the imaging, the Z 7II retains its overall physical design, however it has been updated with a new dual memory card slot interface To hold one CFexpress Type B card and one SD UHS-II card for more flexible storage. Both a high-res 3.6m-dot OLED EVF and rear 3.2" 2.1m-dot tilting touchscreen LCD lend versatility To image composition and playback, and SnapBridge wireless connectivity can be used for remote camera control, image sharing To a mobile device, and even over-the-air firmware updates.
Improving upon their initial efforts, Nikon has revised the Z 7 platform To offer more speed, faster processing, and greater versatility without sacrificing the beloved qualities of the original camera.
A 45.7MP BSI CMOS sensor is used for high-resolution shooting, impressive low-light quality, and fast readout speeds To benefit continuous shooting, movies, and time-lapse recording. The back-illuminated design of the sensor affords noticeably clean high-sensitivity output and reduced noise when working at high ISO values, up To a native ISO 25600, as well as vivid and smooth quality at sensitivities as low as ISO 64. The sensor design also omits the conventional optical low-pass filter in order To achieve the greatest sharpness and resolution from the sensor. Benefitting the sensor are dual EXPEED 6 image processors, which affords a wealth of speed throughout the camera system, including the ability To shoot continuously at 10 fps for up To 50 consecutive frames.
Utilizing the sensor and processor attributes for more than just still imagery, the Z 7II is also a more-than-capable multimedia camera. UHD 4K video recording is possible up To 60p and Full HD 1080p video recording is also supported at up To 120p for slow motion playback. Video files can be saved To the in-camera memory cards or as an uncompressed file To an optional external recorder via HDMI out.
Advanced video functionalities have been added with the Z 7II, including the N-Log gamma for capturing flat-looking footage that maximizes dynamic Range and HLG (HDR) for recording HDR-ready footage. Other additions are the ability To output high-quality 10-bit data over HDMI and an Electronic VR function for smooth handheld shooting. Focus Peaking can be used To benefit manual focus control and a Zebra Stripes option is also available To help detect over-exposed areas within the frame. Audio recording can be handled using the built-in stereo microphone or an optional external mic can be added via the 3.5mm stereo jack for greater control over quality, and live monitoring is possible via the headphone jack.
Located on the sensor is an array of 493 phase-detect autofocus points covering 90% of the image area both vertically and horizontally. This provides fast and accurate focusing for both stills and video and with a wide coverage area, subject tracking will work out To near the edges of the frame. Hybrid AF is available for video, which will automatically switch between phase- and contrast-detect systems To provide smooth focus during shooting. Additionally, the latest NIKKOR Z lenses are optimized for silent operation.
In-body 5-axis sensor-shift Vibration Reduction compensates for up To 5 stops of camera shake regardless of the Z-type lens being used. This system also works with adapted F-mount lenses, when using the optional FTZ Adapter, where 3-axis stabilization is used.
Key Features
Protect and add accessories to your Nikon Z7 II or Z6 II camera when the MB-N11 battery grip is installed with this Camera Cage from SmallRig. The formfitting aluminum cage protects your camera without impeding access to your camera's functions, displays, ports, or MB-N11 battery grip door. The camera mounts on the cage via a 1/4"-20 screw, and the mounting surface features anti-slip pads that, in addition to two M2.5 screws on the sides, hold your camera securely in the cage and prevent it from twisting.
There is one integrated shoe mount on the top and one on the side, as well as multiple 1/4"-20 and 3/8"-16 ARRI-style accessory threads to provide convenient attachment points for articulating arms, external monitors, and other accessories. The bottom and side of the cage feature an integrated Arca-type design for portrait or landscape shooting, and the bottom of the cage features 1/4"-20 and 3/8"-16 threads to connect a camera plate for tripod mounting.
Nikon Z7 II and Z6 II cameras with MB-N11 battery grip installed
Also compatible with but not limited to:
SmallRig Top Handle 2165
SmallRig Top Handle 1638
SmallRig Side Handle 2093
SmallRig Side Handle 2425
SmallRig Monitor Mount 2903
SmallRig Monitor Mount 2904
SmallRig Magic Arm 2115
SmallRig Dual 15mm Rod Clamp 1943
SmallRig 12mm/15mm Single Rod Clamp 3276
Key Features
Built using flagship DNA, the Nikon Z8 is a compact, lightweight camera housing much of the technology from the Z9 but in a sleeker, more portable package. Dubbed the ultimate hybrid camera, the Z8 features the same proven sensor, processing, and AF capabilities of the flagship with a new body design that better suits gimbal use, event shooting, and other handheld applications.
Flagship Sensor and Processing
Featuring the same sensor that debuted in the Z9, the FX-format 45.7MP BSI stacked CMOS sensor offers a useful combination of resolution, fast readout speeds, impressive clarity, and minimal noise. The stacked design contributes to reduced rolling shutter while the BSI designation ensures improved noise levels when working at the top end of the extended ISO 32-102400 range. Also, the 45.7MP resolution and full-frame sensor size hit a sweet spot that benefits photographers working in detail-oriented genres as well as enables recording video at resolutions up to 8K.
Complementing the sensor is the EXPEED 7 processing engine, which offers speeds approximately 10x faster than a Z7 II. This engine works in conjunction with the stacked sensor design to realize impressively fast AF speeds, burst shooting rates, a high buffer capacity, fluid video performance, and quick all-around handling.
Relying on the speed and stacked design of the sensor, the Z8 completely forgoes a mechanical shutter and uses just an electronic shutter for all capture modes. The speed of the sensor enables recording at up to 1/32,000 sec and the stacked structure reduces motion distortion for accurate depiction of fast-moving subjects, like golf clubs, baseball bats, and automobiles. Also, despite the absence of a mechanical shutter, flash sync up to 1/200 sec. is still supported as well as high speed sync functions.
By removing the mechanical shutter, the Z8 can also operate completely silently and there is no worry over mechanical shutter wear or breakdown. A shutter release sound can be added for awareness when a photo is being taken, and the volume can be adjusted to suit different working scenarios.
Perfect for portraits, the Z8 improves on the sensor's inherent capabilities with a series of processing tools and shooting functions to improve portraits:
493-Point Phase-Detection AF
Covering the full sensor area, the Z8 uses the flagship 493-point phase-detection AF system to realize fast and accurate focusing performance. This system is benefitted by the high-speed communication of the Z interface along with the speed of the sensor that enables AF readings to occur at up to 120 fps.
This focusing system also supports working in low-light conditions with a Starlight mode that permits focusing down to -9 EV to greatly benefit astrophotography, concert, and other nighttime shooting applications. Also useful for working in difficult lighting conditions, Backlit AF uses separate pixels on the sensor for AF, allowing these areas to intentionally overexpose for focusing accuracy purposes without impacting the actual exposure of the recorded image.
A mainstay focusing mode in DSLRs, which debuted for mirrorless with the Z9, the Z8 also includes 3D Tracking AF that pairs with subject detection to lock onto fast, erratically moving subjects that move parallel and perpendicular to the camera. Additionally, there are three Dynamic-Area AF modes, with a range of focus area sizes, for capturing a broad variety of moving subject types.
Utilizing inherited algorithms and deep learning technology from the Z9, including sophisticated Subject Detection, the Z8 can recognize a variety of distinct subject types, ranging from humans to animals to airplanes to bicycles. When working in Auto-Area AF, these subjects will automatically be detected, focused on, and tracked to ensure sharp focus when the subject is moving across the frame.
Eye-Detection AF, specifically, has been tuned for improved accuracy and refined recognition of eyes in the scene, regardless of how small or large they are within the image frame, and can also be used in conjunction with custom Wide-Area AF for different subject shapes and sizes.
Internal 8K60 and 4K 120 Recording
Equally capable for video, the Z8 matches the Z9's recording capabilities here, as well, with a variety of resolutions and frame rates available up to 8K. Using full pixel readout, UHD 8K 30p video can be recorded with continuous shooting possible for approximately 2 hours 5 minutes.
UHD 4K and Full HD recording is also possible in a variety of frame rates, including full-frame 4K recording at up to 120p for slow-motion playback. Using an 8K area, oversampled UHD 4K recording is possible at up to 60p for increased sharpness and detail. Also, high-resolution frame grabs can be recorded in camera from 8K and 4K videos, for producing 33MP or 11MP stills, respectively.
12-Bit N-RAW and ProRes RAW Video
Internal 12-bit raw recording at up to 8.3K 60p in the N-RAW format is supported along with internal ProRES RAW HQ. Raw recording offers greater tonal and color latitude and can improve dynamic range, benefitting color grading needs and post-production flexibility.
Internal recording is also supported with 10-bit color and 4:2:2 sampling in the ProRes 422 HQ and H.265 codecs, and H.264 and 4:2:0 color can be used depending on workflow needs. For more latitude when color grading in post, there is also a 10-bit N-Log setting as well as a Flat color profile. Additionally, HLG (Hybrid Log Gamma) can be used for creating HDR-ready content straight from the camera.
Recording Support
Aiding the impressive recording specs, the Z8 also incorporates a variety of useful recording tools and functions for use in productions:
Matching the professional build quality, the Z8 is fitted with a variety of connectivity options to suit various workflow needs:
Key Features
Power select Nikon cameras with the EN-EL15c rechargeable lithium-ion battery. This battery has the EN-EL15 form factor and can be used as a higher capacity substitute for previous generation batteries. It is compatible with the MH-25 and MH-25a chargers, or, when used with Z cameras, it can be charged in-camera using the EH-7P Charging AC Adapter or EH-8P AC Adapter.
Camera Compatibility
Z8
Z7 II
Z7
Z6 II
Z6
Z5
D850
D810
D810
D800
D800E
D780
D750
D7500
D7200
D7100
D7000
D610
D600
D500
V1
Battery Pack Compatibility
MB-N12
MB-N11
MB-N10
MB-D18
MB-D17
MB-D16
MB-D15
MB-D14
MB-D12
Wireless Transmitter Compatibility
WT-7
Key Features
This Megadap ETZ21 Pro Sony E-Mount Lens to Nikon Z-Mount Autofocus Adapter allows you to mount a Sony E-mount lens on a Nikon Z-mount camera. Compatible with both Sony and third-party E-mount lenses, this adapter not only works on any Nikon Z-mount camera, but also enables the use of advanced features including autofocus, image stabilization, and camera-controlled aperture functions. The Pro version features a redesigned lens release button, compatibility with Sigma and Tamron lenses, and the ability to update the firmware via the camera body.
Functionality
Compatibility
Compatible Lens Brands
ZEAPON Timelapse Trigger, the first accessory product, was born in 2021 to inject fresh blood into the brand's product ecology.
It brings a brand-new experience for rail slider shooting moving timelapse scenes, solves the problem of picture distortion caused by the camera's incorrect exposure when shooting timelapse photography from day to night.
ZEAPON brings a set of flexible, portable and stable shooting system for timelapse photographers who use Micro 2 series motorized rail slider.
Through this system, the art of time passing can be controlled, the fleeting beauty can be touched, and new users can become timelapse masters.
Smooth Transition of Exposure Calibration
When shooting timelapse photography from day to night, with the function of timelapse trigger, the camera is automatically calibrated with its own timelapse photography function to obtain accurate exposure.
Photographers do not need to worry about the distortion of image quality caused by the change of light, so they can easily get the smooth gradual change effect of day to night exposure, and the post-production work can be greatly reduced.
* When using it, the camera shutter should be set to "rear curtain sync"
Flexible Dual Control of Signal Synchronization
Timelapse trigger brings a brand-new experience for rail slider shooting timelapse scenes, breaks through the limitation that "the rail slider can only control the camera in one direction" in this scene, and achieves "camera controlling rail slider" through the transmission of timelapse trigger signals, so that the camera becomes the dominant device, and the parameters can be adjusted more freely to meet the requirements of more timelapse scenes.
Improvement and Upgrade of ZEAPON Timelapse Shooting System
With the Micro 2 series motorized rail slider and timelapse trigger, as well as the new upgrade of the App, ZEAPON brings a set of flexible, portable and stable shooting system for timelapse photography players, and creates the most complete timelapse shooting experience.
The functions of "Intelligent Timelapse", "Custom Timelapse" and "Camera Mode" are all available.
Even the more difficult day to night moving timelapse can be easily mastered. Through this system, the art of time passing can be controlled, and new users can become timelapse masters.
* The timelapse trigger can only be adapted for using with Micro 2 series motorized rail slider;
Refuse Complexity and Pursue Simplicity, Two Connection Methods
Wireless
The rail slider is controlled by the camera in Camera mode, and the rail slider and timelapse trigger are connected through mobile phone Bluetooth (App) at the same time. The transmission distance is up to 15m, achieving response without delay, which is stable and reliable;A signal multiplexing system is designed to ensure that the timelapse trigger is still on standby for the next command at any time when unexpected situations occur such as camera signal missing, so as to maintain the normal operation of the entire system;
* When using Bluetooth connection, avoid leaving the mobile phone 15m away from the timelapse trigger, and avoid the presence of large obstacles between the mobile phone and the timelapse trigger, so as not to cause signal disconnection or occlusion and affect shooting;
* If the signal is interrupted when the mobile phone got away, the camera is still shooting, and the rail slider stops running due to signal interruption, you need to press the camera's shooting button again to enable the camera to start its own timelapse photography function, so as to ensure that the device completes the original set motion path.
Wired
The camera is controlled by the rail slider in the mode of Intelligent Timelapse and Custom Timelapse, and the camera can be directly connected to the timelapse trigger through the shutter cable instead of connecting the rail slider. Therefore, the situation of the shutter cable pulling caused by the moving of the rail slider is effectively avoided, there is no need to worry about the influence of the shaking of the equipment on the shooting effect, and the shooting process is more flexible.
Offline Operation
ZEAPON Lab APP can be switched to run in the background, there is no need to prepare more mobile phones, and it does not affect watching videos and replying messages during the shooting intervals.
Palm-sized and Portable
The timelapse trigger is powerful, but only palm-sized,
it does not take up space in the bag, and it is easy to carry for traveling.
Long-Lasting Battery Life and No Fear of Danger
With built-in polymer lithium battery, the battery life in continuous operation is up to 14 hours.
It can also be powered by a rechargeable battery at the same time,
easily coping with the extreme environmental conditions of timelapse photography such as starlapse, galaxy, sunrise and moonset.
Flexible Installation and Free Extension
The timelapse trigger is equipped with extended cold shoe port, which can fix microphones,
flashlights and other equipment according to different shooting scenes, and fully meets the requirements of various equipment erection.
Camera Compatibility List:
Sony:
ILCE-6400 / ILCE-7M3 / ILCE-7RM4A / ILCE-7SM3 / ILCE 1 / ILCE-7RM3A / ILCE 7CL / DSC-RX100M7 / ZV-1 / ILCE-9M2 / ILCE-6600 / ILCE-6600m / ILCE-6400L / ILCE-6400M / ILCE-7RM4 / ILCE-7M3K / ILCE-7C / ILCE-9
Canon:
EOS 6DMark Ⅱ / EOS R6 / EOS R5 / EOS M6 Mark II / EOS 7D Mark II / EOS 90D / EOS 5D Mark IV / EOS 90D / EOS RP / EOS 77D / EOS 5DS / EOS 5DSR / EOS 80D
Nikon:
D7500 / D780 / D850 / D6 / D750 / D610 / D5600 / D500 / Z7Ⅱ / Z6Ⅱ / Z5 / Z50 / Z6 / Z7 / D5 / DF / D810A / D810 / D7200 / D5300
Lumix:
DC-S5GK-K / DC-S5KGK-K / DC-GH5SGK / DC-GH5GK / DC-S1KGK-K / DC-S1HGK-K / DC-S1RGK-K / DC-G95GK / DMC-GH4GK / DMC-G85GK / DC-S1MGK-K / DC-S1GK-K / DC-FZ10002GK
Fujifilm:
X-S10 / X-T4 / X-T30 / X-A7 / X-T3 / x-pro3 / X100V / X100F / XT200 / X-H1 / X-Pro2 / X-T2 / X-T100 / X-E3 / X-T1 / X-E4 / GFX 50R / GFX 50s / GFX 100 / GFX 100S
The Falcam Foldable Half Camera Cage offers a versatile solution for various shooting scenarios. It features a unique dual-axis design that allows you to adjust the angles of the top, side, and bottom plates with ease, transforming it from a full cage into a half-cage configuration. The half-cage's bottom plate is equipped with an F38 quick-release interface, enabling effortless camera assembly and disassembly.
This cage is compatible with the F22, F38, and F50 quick-release systems, offering a range of attachment options such as 1/4" threaded holes, ARRI locating holes, wire clamp locating holes, strap holes, and cold shoe mounts to meet diverse expansion needs. It features a double-locking mechanism for enhanced stability, ensuring your camera stays securely in place.
The Falcam Foldable Half Camera Cage is compatible with a wide range of cameras, including Sony, Canon (R5/R6/R7/R10), Nikon (Z5/Z50/Z6/Z60/Z7), Fuji (XT series, XH series), and more. For certain blocky camera models like the Nikon Z8/Z9, the cage offers a unique vertical top plate installation method, similar to an L bracket.
With the option to pair it with Falcam F22, F38, F50, or Maglink quick release accessories, you'll experience seamless and fast transitions between different photography scenarios. Don't miss the opportunity to make your photography more versatile and efficient with the Falcam Foldable Half Camera Cage.
Key Features
Protect and add accessories to your Nikon Z7 II, Z6 II, Z7, Z6, or Z5 camera with this Camera Cage from SmallRig. The formfitting aluminum cage protects your camera without impeding access to your camera's functions, displays, ports, or battery. The camera mounts on the cage via a 1/4"-20 screw, and the mounting surface features anti-slip pads which, in addition to an M2.5 screw on the side, hold your camera securely in the cage and prevent it from twisting.
An integrated shoe mount and a side NATO rail provide convenient attachment points for articulating arms, external monitors, and other accessories. The cage incorporates multiple 1/4"-20 and 3/8"-16 ARRI-style accessory threads for additional mounting options. The bottom of the cage is tapped with 1/4"-20 and 3/8"-16 threads to connect a camera plate for tripod mounting.
Nikon Z7 II, Z6 II, Z7, Z6, and Z5 cameras
Also compatible with but not limited to:
SmallRig Top Handle 2165
SmallRig Monitor Mount 2903
SmallRig NATO Handle 2187
SmallRig FTZ Lens Adapter Support 2244
SmallRig HDMI/USB Cable Clamp 2927
Key Features
Outfit your compatible Nikon Z series camera with an ergonomic, aluminum alloy cage using the Quick Release Camera Cage from Falcam. Its custom-fit design maintains access to your camera's controls and ports. Multiple 1/4"-20 and 3/8"-16 ARRI-style threads allow you to mount articulating arms and secondary monitors on your rig. A cold shoe mount allows you to attach a shotgun microphone or fill light. This cage is compatible with Falcam F22 and F38 quick release accessories for single-button integration of additional arms and adapters to increase your mounting options.
Key Features
Compact, Lightweight, Powerful
Built using flagship DNA, the Nikon Z8 is a compact, lightweight camera housing much of the technology from the Z9 but in a sleeker, more portable package. Dubbed the ultimate hybrid camera, the Z8 features the same proven sensor, processing, and AF capabilities of the flagship with a new body design that better suits gimbal use, event shooting, and other handheld applications.
Flagship Sensor and Processing
45.7MP Stacked BSI CMOS Sensor
Featuring the same sensor that debuted in the Z9, the FX-format 45.7MP BSI stacked CMOS sensor offers a useful combination of resolution, fast readout speeds, impressive clarity, and minimal noise. The stacked design contributes to reduced rolling shutter while the BSI designation ensures improved noise levels when working at the top end of the extended ISO 32-102400 range. Also, the 45.7MP resolution and full-frame sensor size hit a sweet spot that benefits photographers working in detail-oriented genres as well as enables recording video at resolutions up to 8K.
EXPEED 7 Image Processor
Complementing the sensor is the EXPEED 7 processing engine, which offers speeds approximately 10x faster than a Z7 II. This engine works in conjunction with the stacked sensor design to realize impressively fast AF speeds, burst shooting rates, a high buffer capacity, fluid video performance, and quick all-around handling.
Electronic Shutter-Only Design
Relying on the speed and stacked design of the sensor, the Z8 completely forgoes a mechanical shutter and uses just an electronic shutter for all capture modes. The speed of the sensor enables recording at up to 1/32,000 sec and the stacked structure reduces motion distortion for accurate depiction of fast-moving subjects, like golf clubs, baseball bats, and automobiles. Also, despite the absence of a mechanical shutter, flash sync up to 1/200 sec. is still supported as well as high speed sync functions.
By removing the mechanical shutter, the Z8 can also operate completely silently and there is no worry over mechanical shutter wear or breakdown. A shutter release sound can be added for awareness when a photo is being taken, and the volume can be adjusted to suit different working scenarios.
More Beautiful Portraits
Perfect for portraits, the Z8 improves on the sensor's inherent capabilities with a series of processing tools and shooting functions to improve portraits:
Fast and Intelligent AF
493-Point Phase-Detection AF
Covering the full sensor area, the Z8 uses the flagship 493-point phase-detection AF system to realize fast and accurate focusing performance. This system is benefitted by the high-speed communication of the Z interface along with the speed of the sensor that enables AF readings to occur at up to 120 fps.
This focusing system also supports working in low-light conditions with a Starlight mode that permits focusing down to -9 EV to greatly benefit astrophotography, concert, and other nighttime shooting applications. Also useful for working in difficult lighting conditions, Backlit AF uses separate pixels on the sensor for AF, allowing these areas to intentionally overexpose for focusing accuracy purposes without impacting the actual exposure of the recorded image.
A mainstay focusing mode in DSLRs, which debuted for mirrorless with the Z9, the Z8 also includes 3D Tracking AF that pairs with subject detection to lock onto fast, erratically moving subjects that move parallel and perpendicular to the camera. Additionally, there are three Dynamic-Area AF modes, with a range of focus area sizes, for capturing a broad variety of moving subject types.
Subject Detection with Deep Learning Technology
Utilizing inherited algorithms and deep learning technology from the Z9, including sophisticated Subject Detection, the Z8 can recognize a variety of distinct subject types, ranging from humans to animals to airplanes to bicycles. When working in Auto-Area AF, these subjects will automatically be detected, focused on, and tracked to ensure sharp focus when the subject is moving across the frame.
Eye-Detection AF, specifically, has been tuned for improved accuracy and refined recognition of eyes in the scene, regardless of how small or large they are within the image frame, and can also be used in conjunction with custom Wide-Area AF for different subject shapes and sizes.
Video Powerhouse
Internal 8K60 and 4K 120 Recording
Equally capable for video, the Z8 matches the Z9's recording capabilities here, as well, with a variety of resolutions and frame rates available up to 8K. Using full pixel readout, UHD 8K 30p video can be recorded with continuous shooting possible for approximately 2 hours 5 minutes.
UHD 4K and Full HD recording is also possible in a variety of frame rates, including full-frame 4K recording at up to 120p for slow-motion playback. Using an 8K area, oversampled UHD 4K recording is possible at up to 60p for increased sharpness and detail. Also, high-resolution frame grabs can be recorded in camera from 8K and 4K videos, for producing 33MP or 11MP stills, respectively.
12-Bit N-RAW and ProRes RAW Video
Internal 12-bit raw recording at up to 8.3K 60p in the N-RAW format is supported along with internal ProRES RAW HQ. Raw recording offers greater tonal and color latitude and can improve dynamic range, benefitting color grading needs and post-production flexibility.
ProRes and H.265 10-Bit Recording
Internal recording is also supported with 10-bit color and 4:2:2 sampling in the ProRes 422 HQ and H.265 codecs, and H.264 and 4:2:0 color can be used depending on workflow needs. For more latitude when color grading in post, there is also a 10-bit N-Log setting as well as a Flat color profile. Additionally, HLG (Hybrid Log Gamma) can be used for creating HDR-ready content straight from the camera.
Recording Support
Aiding the impressive recording specs, the Z8 also incorporates a variety of useful recording tools and functions for use in productions:
A Smaller Professional Body Design
Sleek, Modular, and Durable Construction
Real-Live Viewfinder
Four-Axis Tilting LCD
Versatile Connectivity
Matching the professional build quality, the Z8 is fitted with a variety of connectivity options to suit various workflow needs:
Nikon NIKKOR Z 24-120mm f/4 S Lens (Nikon Z)
All-in-One Versatility
A truly versatile everyday lens, the NIKKOR Z 24-120mm f/4 S, from Nikon, is a wide-angle to short-telephoto zoom covering an extremely useful range of focal lengths to benefit a variety of applications from landscape to portraiture. The constant f/4 maximum aperture offers consistent performance throughout the zoom range and the lens features an advanced optical design for high sharpness and clarity. As a go-to lens for a majority of needs, this lens also sports a relatively compact and lightweight design.
Optical Design
Autofocus
Handling and Design
Key Features
The M-Z 6-Bit Adapter Ring from TTArtisan allows Nikon mirrorless cameras to do Exif recording and image stabilization with M-mount lenses, such as those by Leica or Zeiss. Alternatively, non-6-bit lenses can be used as well by manually setting the adapter to record data. The adapter allows you to select 135, 90, 75, 50, 35, and 28mm focal lengths. Compatible with Nikon Z-mounts, it can be used on APS-C Z50, Z30, and ZFC cameras as well as Z5, Z6 II, Z7, Z7 II and Z9 full-frame format cameras.
Trap Focus
This 6-Bit adapter ring also supports trap focus. First, set the camera focus mode to AF-S. Then, while pressing the shutter fully, slowly turn the focus ring, when the focus is clear, the camera can quickly take a clear photo.
Focus Indicator Function
This 6-Bit adapter ring also supports the focus distance indicator function. Set manual focus mode on the body - there will be two opposite triangular icons at the bottom left of the display. Find out faster whether the focus point is in front of or behind the subject and take clear photos.
Button for Resetting the Focus Length
After changing lens or setting the focal length on the dial, press the reset button to record the focal length information of the new lens.
Focal Length Identifying with a Click Focal Length Dial
Uses a click focal length dial avoids changing the focal length on the dial by mistake during the use. When using a lens without the 6-bit contact, the focal length dial needs to be set to be consistent with the focal length of the lens. Press the reset button to record the focal length information.
Preset Selectable Focal Lengths
135, 90, 75, 50, 35, and 28mm
Aperture Data Recording
Set the same aperture data as the current aperture of the lens on the camera, and the aperture data of the manual lens will be recorded in the EXIF information.
Aperture data is determined by the camera body. If there is no corresponding aperture in the camera, it cannot be set to the aperture data of the lens.
Camera Anti-Shake
With the adapter ring, even advanced features like the camera's anti-shake function can be used as usual.
Lightweight Body, Feel Free to Carry
The adapter ring is made of high-grade aviation aluminum, and the weight is only 42 grams to lighten your burden and keep the focus on creation.
High Extinction Coating of Inner Wall
Extinction thread suppresses stray light and ensures image quality.
Applicable Models
Nikon Z-Mount
APS-C Frame: Z50, Z30, and ZFC
Full Frame: Z5, Z6, Z6 II, Z7, Z7 II, and Z9
Key Features
This ETZ21 Sony E-Mount Lens to Nikon Z-Mount Autofocus Adapter from Megadap allows a Sony E-mount lens to be used on Nikon Z-mount cameras. Compatible with both Sony and third-party E-mount lenses, this adapter not only works on any Nikon Z-mount camera, but also enables the use of advanced features such as autofocus, image stabilization, and camera-controlled aperture functions. The adapter has been updated with a stainless steel bayonet that provides better sealing on the circuit board and a new chip for compatibility with Nikon's most recent protocols. Additionally, the adapter is firmware upgradable via an included firmware clip.
Functionality
Compatibility
Compatible Lens Brands
Key Features
Supporting a variety of camera rig sizes horizontally, vertically, or mounted on a tripod, the quiet and compact Shark Slider Nano Bundle from iFootage offers smooth slides to heighten your production quality in a compact, portable form factor. The quiet, brushless motors propel your camera along the track that provides 2-in-1 bidirectional movement using a top or bottom carriage to extend the slider up to 15.7" sliding length to either side when mounted on a tripod.
The slider features an IPS touchscreen that allows you to control settings and movement, and it allows you to change between specialized preset DSLR modes or smartphone modes to utilize time-lapse, speed, keyframing, start/stop, and more. You can also control the slider using the free-to-download iOS/Android Moco app that provides control over time-lapse, photo shutter and camera start/stop using the included shutter cables for select cameras, and stop-motion animation movements.
It supports camera rigs up to 7.7 lb when mounted on a surface, up to 4.4 lb vertically, and up to 5.5 lb when it's mounted on a tripod. The top carriage mount also allows you to rotate the camera 360° using its own rotating design without the need to add a mounting head. There is a safety lock to quickly ensure the carriage is locked in place, carriage tension control to ensure stability, and a collision sensor that will stop the carriage before it collides with an obstacle.
The Shar Slider Nano is powered using an L-series battery, and an NP-F750 battery is included. The battery can be charged on the slider using the included USB-Type-C cable. A smartphone mount is also included with the slider.
Compact, portable motorized slider with quiet, brushless motors
Supports up to 7.7 lb horizontally
Supports up to 4.4 lb vertically
Supports up to 5.5 lb mounted on a tripod
IPS touchscreen control
LANC port for remote camera control
Up to 15.7" of camera travel (bidirectional on a tripod), 16.5" total length
iOS and Android control app with time-lapse and stop-motion effects
Robust aluminum and stainless steel build
Uses widely available LP-E6-type batteries
7D, 6D, 5D series, 1D series, 50D, 40D, 30D, 20D, 10D, R5, 1DX Mark III, 5D Mark II, 5D Mark III, 5D Mark IV, 6D Mark II
A58, NEX-3NL, a7, a7R, a3000, a6000, HX300, HX50, RX100M2, HX400, HX60, a7S, a7 II, a7S III, a7 III, a9 II, a7R III, a7R, a7 III, a7, a6600, a6400, a6500, a99 II, a77 II
DMC-FZ50, DMC-FZ50K, DMC-FZ50S, DMC-FZ30, DMC-FZ150, DMC-FZ30K, DMC-FZ30S, DMC-FZ20, DMC-FZ20K, DMC-FZ22S, LC-1, L1, L10, G10, G2, G1, GF1, GH1, GH1, G3, GX1, GH4, G9, G9L, G95, G85, GH5
DIGILUX 2, DIGILUX 3
D7000, D5100, D3200, D3100, D90, D600, D7100, D5300, D610, D5200, D3300, D750, D780, D7200, D5600, Z7 II, Z6 II, Z7, Z6, Z5, DF
X-T1, X-E3, X-E2, X-E2S, X-A10, X-A7, X-A3, X-A2, X-A1, X-M1, XQ2, XQ1, X-T20, X-T10, X-T200, X-T100, X70, X30, X100F, X100T, FINEPIX S1, X-PRO3, X-PRO2, GFX50S
The Falcam Foldable Half Camera Cage offers a versatile solution for various shooting scenarios. It features a unique dual-axis design that allows you to adjust the angles of the top, side, and bottom plates with ease, transforming it from a full cage into a half-cage configuration. The half-cage's bottom plate is equipped with an F38 quick-release interface, enabling effortless camera assembly and disassembly.
This cage is compatible with the F22, F38, and F50quick-release systems, offering a range of attachment options such as 1/4" threaded holes, ARRI locating holes, wire clamp locating holes, strap holes, and cold shoe mounts to meet diverse expansion needs. It features a double-locking mechanism for enhanced stability, ensuring your camera stays securely in place.
The Falcam Foldable Half Camera Cage is compatible with a wide range of cameras, including Sony, Canon (R5/R6/R7/R10), Nikon (Z5/Z50/Z6/Z60/Z7), Fuji (XT series, XH series), and more. For certain blocky camera models like the Nikon Z8/Z9, the cage offers a unique vertical top plate installation method, similar to an L bracket.
With the option to pair it with Falcam F22, F38, F50, or quick release accessories, you'll experience seamless and fast transitions between different photography scenarios. Don't miss the opportunity to make your photography more versatile and efficient with the Falcam Foldable Half Camera Cage.