Sony NP-BX1/M8 Overview

The NP-BX1/M8 Rechargeable Lithium-Ion Battery Pack from Sony is designed to replace the original NP-BX1 battery. It is rated at 3.6V and features a capacity of 1240mAh.

Camera Compatibility

Cyber-shot:
DSC-RX100
DSC-RX100 II
DSC-RX100 III
DSC-RX100 IV
DSC-RX1
DSC-RX1R
DSC-HX300
DSC-HX50V
DSC-WX300
DSC-HX400V

Action Cam:
FDR-X1000V
HDR-AS200V
HDR-AS100
HDR-AS30V
HDR-AS20
HDR-AS10
HDR-AS15

Sony ALC-F77S Overview

Make sure your 77mm diameter lens has its front element protected when not in use with this replacement ALC-F77S 77mm Front Lens Cap from Sony. This cap features a center-pInch snap-on design for ease of use and reliability.

Key Features

• for 77mm Diameter Lenses
• Protects Front Element of Lens
• Center-PInch Design
• Replacement Part

Sony ACCTRDCX Travel DC Charger Kit

The Sony Battery and Travel DC Charger Kit with NP-BX1 Battery includes a rechargeable battery pack (NP-BX1) and a battery charger (BC-DCX) so you can charge the battery from your computer's USB port. Additionally, you can charge from a wall or car power outlet using a USB adapter (not included).

Cameras that use the NP-BX1 Battery Include:
Cyber-shot: 

• DSC-RX100 
• DSC-RX100II
• DSC-RX1
• DSC-RX1R
• DSC-HX300
• DSC-HX50V 
• DSC-WX300
• DSC-HX400V 

Action Cam: 

• FDR-X1000V
• HDR-AS200V
• HDR-AS100
• HDR-AS30V
• HDR-AS20
• HDR-AS10
• HDR-AS15

Exposure Profile Target II

A 25 patch test target that gathers more information about the camera exposure characteristics than the previous test target. It consists of two sides: An 18% Gray Card used To custom gray (white) balance digital cameras before profiling A Profile Target consisting of a central 18% gray patch that is surrounded by 24 patches arranged in 1/6th stop values that are successively brighter and darker.

The Exposure Profile Target II offers faster, more accurate testing as it requires only three shots To gather a wide Range of exposure data from the camera imaging system. The first shot is made at the normal, metered exposure determined by a Sekonic L-758DR. The second shot is made at -3EV below the metered exposure and the third shot at +3EV above the metered exposure. Please refer To the illustrations on the next page.

To profile your camera and lens combinations, the Exposure Profile Target II is fully compatible with FREE Data Transfer Software and the L-758D, L-758DR, L-758Cine, L-478D, and L-478DR light meters. The result is total exposure accuracy.

Peak Design SLL-AS-3 Overview

Carry your equipment in comfort and style with this ash Slide Lite Camera Strap from Peak Design. This strap uses strong, removable anchor connectors that attach to the eyelets of your camera or the included mounting plate, holding up to 200 lb of gear and easily supporting most DSLR and mirrorless systems. By pairing this versatile connection with a long adjustable length from 39 to 57", the Slide Lite can be configured to work as a sling, shoulder, or neck strap.

The strap has a width of 1.3" and is made of nylon webbing that is padded internally to help ensure comfortable use. Its two sides feature different properties: one side is smooth for sliding the camera to your eye when set up as a sling, while the other has a silicone grip that prevents slipping when using it on your neck or shoulder. The four included anchor points attach and detach from the strap with a single hand and can be left on the eyelets so you can easily switch between cameras while shooting.

• Wearable as a sling, shoulder, or neck strap
• Adjustable length from 39 to 57", and a width of 1.3"
• Removable anchors used to connect to equipment, hold up to 200 lb
• Leave anchors on your gear so you can easily attach and detach them from the strap while shooting
• Smooth and non-slip sides that allow you to choose the amount of grip desired
• Internally-padded webbing provides improved comfort without being bulky
• Four anchor connectors and a tripod plate are included with the product

Peak Design SL-BK-3 Overview

Key Features

• Use as Sling, Shoulder, or Neck Strap
• Holds Pro DSLR or Mirrorless Camera
• Adjustable Length from 39 to 57"
• Anchors Connect to Camera Lugs or Plate
• Designed to Hold up to 200 lb of Gear
• Reversible Smooth and Nonslip Sides
• Nylon Webbing Construction
• Includes Four Anchors and Mounting Plate

Carry your equipment in comfort and style with this black Slide Camera Strap from Peak Design. This strap uses strong, removable anchor connectors that attach to the eyelets of your camera or the included mounting plate, holding up to 200 lb of gear and easily supporting most DSLR and mirrorless systems. By pairing this versatile connection with a long adjustable length from 39 to 57", the Slide can be configured to work as a sling, shoulder, or neck strap.

The strap has a width of 1.8" and is made of nylon webbing that is padded internally to help ensure comfortable use. Its two sides feature different properties: one side is smooth for sliding the camera to your eye when set up as a sling, while the other has a silicone grip that prevents slipping when using it on your neck or shoulder. The four included anchor points attach and detach from the strap with a single hand, and can be left on the eyelets so you can easily switch between cameras while shooting.

• Wearable as a sling, shoulder, or neck strap
• Adjustable length from 39 to 57", and a width of 1.8"
• Removable anchors used to connect to equipment, hold up to 200 lb
• Leave anchors on your gear so you can easily attach and detach them from the strap while shooting
• Smooth and non-slip sides that allow you to choose the amount of grip desired
• Internally-padded webbing provides improved comfort without being bulky
• Four anchor connectors and a tripod plate are included with the product

Peak Design SL-AS-3 Overview

Key Features

• Sling, Shoulder, or Neck Strap
• Holds Pro DSLR or Mirrorless Camera
• Adjustable Length from 39 to 57"
• Strap Width of 1.8"
• Anchors Connect to Camera Lugs or Plate
• Designed to Hold up to 200 lb of Gear
• Reversible Smooth and Non-Slip Sides
• Padded Nylon Webbing Construction
• Includes Four Anchors and Mounting Plate

Carry your equipment in comfort and style with this ash Slide Camera Strap from Peak Design. This strap uses strong, removable anchor connectors that attach to the eyelets of your camera or the included mounting plate, holding up to 200 lb of gear and easily supporting most DSLR and mirrorless systems. By pairing this versatile connection with a long adjustable length from 39 to 57", the Slide can be configured to work as a sling, shoulder, or neck strap.

The strap has a width of 1.8" and is made of nylon webbing that is padded internally to help ensure comfortable use. Its two sides feature different properties: one side is smooth for sliding the camera to your eye when set up as a sling, while the other has a silicone grip that prevents slipping when using it on your neck or shoulder. The four included anchor points attach and detach from the strap with a single hand, and can be left on the eyelets so you can easily switch between cameras while shooting.

• Wearable as a sling, shoulder, or neck strap
• Adjustable length from 39 to 57", and a width of 1.8"
• Removable anchors used to connect to equipment, hold up to 200 lb
• Leave anchors on your gear so you can easily attach and detach them from the strap while shooting
• Smooth and non-slip sides that allow you to choose the amount of grip desired
• Internally-padded webbing provides improved comfort without being bulky
• Four anchor connectors and a tripod plate are included with the product

Peak Design BPC-S-CH-1 Overview

This small Travel Packing Cube from Peak Design is part of a compartment system that enhances the ability to organize the contents of a Peak Design Travel-series bag. Specifically designed to store clothing, it features a double-sided, clamshell configuration that is divided by an internal partition, allowing easy and space-efficient separation of clean and dirty clothes.

Access to the Travel Packing Cube's interior is enabled by its zippered panels. Pull-tabs along the top of those zippered panels can be used to simultaneously retract the zippers while opening a panel for immediate removal or placement of items within the Travel Packing Cube.

While intended to be used as an internal Travel-series bag compartment, this Travel Packing Cube features a durable, weather-resistant nylon construction. An expansion zipper between its two zippered panels allows this Travel Packing Cube to increase from 4.5L to 9L in volume.

Peak Design L-AS-3 Overview

Key Features

• Allows for Quick Separation from Camera
• Use as Neck, Shoulder, Cross-Body Strap
• 32.6 to 57.1" Adjustable Length
• Comfortable Nylon Leather Webbing
• Durable & Versatile Camera Connectors
• Low-Profile Anchor Mount
• Twist Resistant, Soft Pouch

This ash-colored Leash from Peak Design is a camera strap designed to provide photographers with the ability to quickly and easily detach a connected camera from it for such purposes as moving only the camera to a tripod, or connecting another camera to the strap. This is made possible due to the included Peak Design Anchor Links. Each Anchor Link creates a durable, snap-in or snap-out connection point to a strap eyelet on a wide variety of cameras.

Constructed for comfort and usable as neck or shoulder strap, the Leash features twist-resistant nylon and leather webbing. Additionally, it can be worn as a cross-body strap across a right- or left-handed user's body, draped from one shoulder to the opposing hip. When used along with an Anchor Link, the included Peak Design Anchor Mount can create a connection point using a camera's 1/4"-20 bottom accessory thread. By attaching the Leash along a bottom accessory thread and one strap eyelet instead of two, a camera can be made to consistently face forward while against the hip, reducing the time needed by the user to raise it to their eye and capture an image.

The length of this strap Ranges from 32.6 to 57.1" and is 0.8" wide. Integrated adjustment loops allow the length of the Leash to be quickly changed while in use.

• Usable as neck, shoulder, or cross-body strap worn across a right- or left-handed user's body
• Constructed from twist-resistant, nylon and leather webbing
• Provides the ability to quickly and easily detach a connected camera for such purposes as moving only the camera to a tripod, or connecting another camera to the strap
• Included Anchor Links create a durable, snap-in or snap-out connection point to a strap eyelet on a wide variety of cameras
• When used as a cross-body strap, camera can be made to consistently face forward against the hip while using the included Anchor Mount; reducing the time needed by the user to raise it to their eye and capture an image
• Integrated adjustment loops allow length to be quickly changed while in use
• Hex key to attach or detach Anchor Mount
• Microfiber pouch for storage and transport

Peak Design Everyday Sling 6L V2 Overview

Key Features

• Waist or Shoulder Carry, Packable
• Allows Right or Left Shoulder Placement
• Padded Strap with One-Handed Adjustment
• Foldable, Multi-Configuration Dividers
• Organizer Pockets, 11" Tablet Pocket
• Front Panel Pocket
• External Carry Straps
• Capture Clip Attachment Points
• Weather-Resistant Exterior

This 6L, blue-colored, midnight Everyday Sling v2 from Peak Design is a compact, versatile carrying option that can worn around the waist or as a sling bag. When used as a sling, the padded non-slip strap can be configured for wear over the right or left shoulder. Designed to fit snugly against the body, the 6L Everyday Sling v2's zippered clamshell opening allows the main compartment to be easily reached, which includes two dividers that can be configured according to the specific equipment being carried. The dividers are foldable, and can cradle curved surfaces such as the grip of a camera with an attached lens. During use, the foldable dividers enhance protection between those curved surfaces and adjacent items while minimizing the area between them for more efficient use of the main compartment's space.

within the main compartment, the 6L Everyday Sling v2's padded sleeve for an 11" tablet computer is positioned to rest against the wearer while six pockets can serve to store and organize camera batteries, memory cards, or small electronics. Along the exterior of this bag, a pocket with a zippered opening is built into the front panel which faces away from the wearer, and is a convenient space for books, notepads, documents, or snacks. for larger items such as a tripod, monopod, or packable clothing, external carry straps are included to secure such items along the bottom of the 6L Everyday Sling v2.

Featuring a durable nylon construction, the 6L Everyday Sling v2 is built to be weather resistant. To further protect its contents should the bag be placed on a wet surface, the bottom panel is waterproof.

• Compact, versatile 6L carrying option that can worn around the waist or as a sling bag
• Padded non-slip strap can be configured for wear around the waist as well as over the right or left shoulder
• Strap can be tightened or loosened with one hand
• Zippered clamshell opening allows the main compartment to be easily reached
• Two foldable, internal dividers can cradle curved surfaces such as the grip of a camera with an attached lens
• Internal, padded sleeve for an 11" tablet computer
• Six pockets within the main compartment can serve to store and organize camera batteries, memory cards, or small electronics
• Zippered, exterior pocket offers a convenient space for books, notepads, documents, or snacks
• Durable, weather-resistant main compartment zippers with large pulls that can be locked against adjacent gear loops for security
• Included, external carrying straps allow equipment, accessories, or packable clothing to be fastened under the bag's bottom panel
• Durable, weather-resistant nylon construction with waterproof bottom panel
• External attachment points for Peak Design Capture Clips
• Packable, folds flat for storage inside a larger bag or case

Peak Design Everyday Sling 6L V2 Overview

The 6L, ash-colored Everyday Sling v2 from Peak Design is a compact, versatile carrying option that can worn around the waist or as a sling bag. When used as a sling, the padded non-slip strap can be configured for wear over the right or left shoulder. Designed to fit snugly against the body, the 6L Everyday Sling v2's zippered clamshell opening allows the main compartment to be easily reached, which includes two dividers that can be configured according to the specific equipment being carried. The dividers are foldable, and can cradle curved surfaces such as the grip of a camera with an attached lens. During use, the foldable dividers enhance protection between those curved surfaces and adjacent items while minimizing the area between them for more efficient use of the main compartment's space.

within the main compartment, the 6L Everyday Sling v2's padded sleeve for an 11" tablet computer is positioned to rest against the wearer while six pockets can serve to store and organize camera batteries, memory cards, or small electronics. Along the exterior of this bag, a pocket with a zippered opening is built into the front panel which faces away from the wearer, and is a convenient space for books, notepads, documents, or snacks. for larger items such as a tripod, monopod, or packable clothing, external carry straps are included to secure such items along the bottom of the 6L Everyday Sling v2.

Featuring a durable nylon construction, the 6L Everyday Sling v2 is built to be weather resistant. To further protect its contents should the bag be placed on a wet surface, the bottom panel is waterproof.

• Compact, versatile 6L carrying option that can worn around the waist or as a sling bag
• Padded non-slip strap can be configured for wear around the waist as well as over the right or left shoulder
• Strap can be tightened or loosened with one hand
• Zippered clamshell opening allows the main compartment to be easily reached
• Two foldable, internal dividers can cradle curved surfaces such as the grip of a camera with an attached lens
• Internal, padded sleeve for an 11" tablet computer
• Six pockets within the main compartment can serve to store and organize camera batteries, memory cards, or small electronics
• Zippered, exterior pocket offers a convenient space for books, notepads, documents, or snacks
• Durable, weather-resistant main compartment zippers with large pulls that can be locked against adjacent gear loops for security
• Included, external carrying straps allow equipment, accessories, or packable clothing to be fastened under the bag's bottom panel
• Durable, weather-resistant nylon construction with waterproof bottom panel
• External attachment points for Peak Design Capture Clips
• Packable, folds flat for storage inside a larger bag or case

Peak Design Everyday Sling 3L V2 Overview

The 3L, ash-colored Everyday Sling v2 from Peak Design is a compact, versatile carrying option that can worn around the waist or as a sling bag. When used as a sling, the padded non-slip strap can be configured for wear over the right or left shoulder. Designed to fit snugly against the body, the 3L Everyday Sling v2's zippered clamshell opening allows the main compartment to be easily reached, which includes a divider that can be configured according to the specific equipment being carried. The divider is foldable, and can cradle curved surfaces such as the grip of a camera with an attached lens. During use, the foldable divider enhances protection between those curved surfaces and adjacent items while minimizing the area between them for more efficient use of the main compartment's space.

Six pockets within the main compartment can serve to store and organize camera batteries, memory cards, or small electronics. Along the exterior of this bag, a pocket with a zippered opening is built into the front panel which faces away from the wearer, and is a convenient space for books, notepads, documents, or snacks. for larger items such as a tripod, monopod, or packable clothing, external carry straps are included to secure such items along the bottom of the 3L Everyday Sling v2.

Featuring a durable nylon construction, the 3L Everyday Sling v2 is built to be weather resistant. To further protect its contents should the bag be placed on a wet surface, the bottom panel is waterproof.

• Compact, versatile 3L carrying option that can worn around the waist or as a sling bag
• Padded non-slip strap can be configured for wear around the waist as well as over the right or left shoulder
• Strap can be tightened or loosened with one hand
• Zippered clamshell opening allows the main compartment to be easily reached
• Foldable, internal divider can cradle curved surfaces such as the grip of a camera with an attached lens
• Six pockets within the main compartment can serve to store and organize camera batteries, memory cards, or small electronics
• Zippered, exterior pocket offers a convenient space for books, notepads, documents, or snacks
• Durable, weather-resistant main compartment zippers with large pulls that can be locked against adjacent gear loops for security
• Included, external carrying straps allow equipment, accessories, or packable clothing to be fastened under the bag's bottom panel
• Durable, weather-resistant nylon construction with waterproof bottom panel
• External attachment points for Peak Design Capture Clips
• Packable, folds flat for storage inside a larger bag or case

Peak Design Everyday Sling 10L V2 Overview

• Peak Design Everyday Sling v2 (10L, Ash)
• 2 x Divider
• 2 x External Carry Strap

The 10L, ash-colored Everyday Sling v2 from Peak Design is a versatile carrying option with a padded, non-slip strap that can be configured for wear over the right or left shoulder. Designed To fit snugly against the body, the 10L Everyday Sling v2 zippered clamshell opening allows the main compartment To be easily reached, which includes two dividers that can be configured according To the specific equipment being carried. The dividers are foldable, and can cradle curved surfaces such as the grip of a camera with an attached lens. During use, the foldable dividers enhance protection between those curved surfaces and adjacent items while minimizing the area between them for more efficient use of the main compartment space.

within the main compartment, the 10L Everyday Sling v2 padded sleeve for a 13" tablet or laptop computer is positioned To rest against the wearer while four pockets can serve To store and organize camera batteries, memory cards, or small electronics. Along the exterior of this bag, a spacious pocket with a zippered opening is built into the front panel which faces away from the wearer, and is a convenient space for books, notepads, documents, or snacks. for larger items such as a tripod, monopod, or packable clothing, external carry straps are included To secure such items along the bottom of the 10L Everyday Sling v2.

Featuring a durable nylon construction, the 10L Everyday Sling v2 is built To be weather resistant. To further protect its contents should the bag be placed on a wet surface, the bottom panel is waterproof. When traveling with a rolling case that has a telescoping handle, a pass-through band across the 10L Everyday Sling v2 rear panel allows the entire bag To be mounted onto such handles for added convenience.

• Compact, versatile 10L sling bag
• Padded non-slip strap can be configured for wear over the right or left shoulder
• Strap can be tightened or loosened with one hand
• Zippered clamshell opening allows the main compartment To be easily reached
• Two foldable, internal dividers can cradle curved surfaces such as the grip of a camera with an attached lens
• Internal, padded sleeve for an 13" tablet or laptop computer
• Four pockets within the main compartment can serve To store and organize camera batteries, memory cards, or small electronics
• Spacious, zippered exterior pocket offers a convenient space for books, notepads, documents, or snacks
• Durable, weather-resistant main compartment zippers with large pulls that can be locked against adjacent gear loops for security
• Included, external carrying straps allow equipment, accessories, or packable clothing To be fastened under the bag bottom panel
• Durable, weather-resistant nylon construction with waterproof bottom panel
• External attachment points for Peak Design Capture Clips
• Integrated luggage pass-through for convenient mounting To a rolling case telescoping handle
• Packable, folds flat for storage inside a larger bag or case

Peak Design Everyday Zip 20L Overview

The 20L, blue-colored, midnight Everyday Backpack Zip from Peak Design is a versatile, light-duty bag for photographers or multimedia creators, and can serve as a stylish way to carry any personal items that can be placed within it. Complete access to the main compartment is enabled by a zippered, clamshell opening. The zipper travels up both sides of the Everyday Backpack Zip and angles toward the wearer at the top of the bag. Even when partially opened, this angled zipper allows the main compartment to be easily reached whether through the top, or along either side of the Everyday Backpack Zip. Two adjustable dividers allow items to be stacked within the main compartment. The dividers feature foldout surfaces that can be configured to cushion and hold items against the sides of the bag, providing the ability to ensure which items can be most quickly accessed when the Everyday Backpack Zip is rotated from one's back to front with either side facing upward.

When this Everyday Backpack Zip is worn, a zippered sleeve with dedicated pockets for a 12.9" tablet computer, a 15" laptop, as well as documents rests behind the shoulders. To store and organize batteries, memory cards, small electronics, or personal items, the inside surfaces of each of the side openings include a both a slip pocket and a zippered pocket. Along the exterior of the side openings are two large open pockets that can each hold a water bottle, tripod, or monopod; any one of which can be secured using the included external carrying straps with the gear loops located above each pocket. with the additional gear loops distributed along the surface of the Everyday Backpack Zip, the carrying straps allow equipment, accessories, or packable clothing to be fastened against the bag's front panel.

Peak Design Everyday 20L V2 Overview

Key Features

• Versatile, Size-Adjustable Backpack
• Adjustable Height from 18.3" to 22.3"
• Top Flap with Magnetic Latch System
• Dual Side-Access Panels
• Foldable, Multi-Configuration Dividers
• Organizational Pockets
• 15" Laptop and 12.9" Tablet Pockets
• 2 Bottle Pockets/Tripod, Monopod Holders
• Anchor Link Key Tether
• 3 Exterior Handles, Weather Resistant

This 20L, charcoal-colored Everyday Backpack v2 from Peak Design is a versatile bag that is designed for photographers, multimedia creators, or anyone whose carrying requirements can benefit from its compressible, size-adjustable design that minimizes bulk or can be expanded as needed. Multiple magnetic latches for its top flap allow this backpack To vary from 18.3" To 22.3" in height, while inside, three dividers allow items To be stacked within the main compartment. The dividers also feature foldout surfaces that can be configured To cushion and hold items against either of the Everyday Backpack v2 zippered side openings. Since the side openings are positioned To face the wearer when the bag is rotated from one back To front with either side facing upward, the dividers provide the ability To ensure which items can be most quickly accessed from the bag sides.

When this Everyday Backpack v2 is worn, a zippered sleeve with dedicated pockets for a 12.9" tablet computer, a 15" laptop, as well as their chargers and cables rests behind the shoulders. To store and organize batteries, memory cards, small electronics, or personal items, the inside surfaces of each of the side openings include a both a slip pocket and zippered pocket. Along the exterior of the side openings are two large, open pockets that can each hold a water bottle, tripod, or monopod any one of which can be secured using the included short external carrying straps with the gear loops located above each pocket.

Long external carrying straps are also provided. with the additional gear loops distributed along the surface of the Everyday Backpack v2, those carrying straps allow equipment, accessories, or packable clothing To be fastened against the bag front panel. Alternatively, the long external carrying straps can be used as rear loading straps To secure items under the bottom of the Everyday Backpack v2.

The Everyday Backpack v2 can be carried using the wide, built-in handles along its top, sides, or by its adjustable, shoulder straps. for heavy loads, this bag sternum strap can be used To more evenly distribute the weight being carried. During storage or transport, the shoulder straps can be magnetically fastened against the rear panel, which also features an integrated luggage pass-through, allowing this bag To be mounted onto a rolling case telescoping handle for added convenience.

Featuring a durable, nylon construction, the Everyday Backpack v2 is built To be weather resistant. To further protect its contents should the bag be placed on a wet surface, the bottom panel is waterproof.

Capacity

• Versatile, 20L backpack that is designed for photographers, multimedia creators, or anyone whose carrying requirements can benefit from its compressible, size-adjustable design
• Top flap with multiple magnetic latches allow this backpack To vary from 18.3" To 22.3" in height
• Size-adjustable, zippered sleeve with dedicated pockets for a 12.9" tablet computer, a 15" laptop, as well as their chargers and cables
• Two large, open exterior pockets that can each hold a water bottle, tripod, or monopod with included short external carrying straps
• Long external carrying straps allow equipment, accessories, or packable clothing To be fastened against the bag front panel or under the bag bottom panel
• Key tether with Peak Design Anchor Link

Fit and Handling

• Main compartment can be accessed through a top flap or through zippered side openings on both sides of this backpack
• Three included dividers allow items To be stacked within the main compartment
• Dividers also feature foldout surfaces that can be configured To cushion and hold items against either of the zippered side openings
• Durable, weather-resistant zippers for side openings with large pulls that can be locked against adjacent gear loops for security
• Adjustable shoulder straps pivot where they connect To the bag To help maximize comfort
• Quick-connecting, stowable sternum strap can be used To more evenly distribute the weight being carried
• Separately-available waist belt helps To prevent the bag from unintentionally shifting around the wearer such as when traveling over rough or uneven terrain
• Rear panel elevated structure optimizes air circulation, minimizing perspiration in warm and hot environments
• Wide, built-in carry handles along top and both sides
• Integrated luggage pass-through for convenient mounting To a rolling case telescoping handle
• Shoulder straps can be magnetically fastened against the rear panel during storage and transport
• Durable, weather-resistant nylon construction with waterproof bottom panel

Peak Design CF-AS-3 Overview

Key Features

• Secures Camera or Binocular to Wrist
• Adjustable to Wrist Size
• Comfortable Nylon, Leather Webbing
• Durable, Versatile Camera Connectors
• Converts to Bracelet for Transport
• Soft Pouch Included

The ash-colored Cuff from Peak Design is a strap that allows you to secure a camera or binocular to your wrist as you keep it in hand. An aluminum-alloy sliding buckle allows its nylon and leather webbing to be adjusted for a comfortable, snug fit while the camera or binocular is connected to the strap by using one of two, included Anchor Links. Each Anchor Link creates a durable, snap-in or snap-out connection point to a strap eyelet on a wide variety of camera or binoculars.

for convenient storage or transport, the Cuff wrist strap can be detached from an Anchor Link and worn as a bracelet or placed within an included microfiber pouch. When worn as a bracelet, the length of the strap can be wrapped around the wrist and magnetically secured along its own surface.

Peak Design Cuff Camera Wrist Strap (Charcoal)

The charcoal-colored Cuff from Peak Design is a strap that allows you to secure a camera or binocular to your wrist as you keep it in hand. An aluminum-alloy sliding buckle allows its nylon webbing to be adjusted for a comfortable, snug fit while the camera or binocular is connected to the strap by using one of two, included Anchor Links. Each Anchor Link creates a durable, snap-in or snap-out connection point to a strap eyelet on a wide variety of camera or binoculars.

for convenient storage or transport, the Cuff wrist strap can be detached from an Anchor Link and worn as a bracelet or placed within an included microfiber pouch. When worn as a bracelet, the length of the strap can be wrapped around the wrist and magnetically secured along its own surface.

Peak Design CL-3 Overview

Key Features

• Quick Connecting
• Quick Adjusting
• Works with or without Battery Grips
• Arca-Type Compatible QR Plate

The Peak Design CL-3 Clutch Camera Hand Strap quickly connects to and disconnects from your camera with a dyneema anchor and a tension clip. The strap wraps around your hand and can be easily adjusted with your non-shooting hand for making it tighter when you are walking. Or loosen it when you need better access to your controls while shooting.

An included Arca-type compatible quick release plate attaches to your camera tripod mount, and one of the included anchors can be tied into the plate. Simply slide the Anchor into the Link to attach the strap, and slide it out to detach it. To attach the top of the strap to the top of your camera, a custom-designed tension clip acts as a small carabiner. The strap can be adjusted from 7.1 to 11.4".

Peak Design CC-S-3 Overview

Key Features

• Clip Only, Replacement or Extra Part
• For Straps up to 2.5" Wide & 0.87" Thick
• Withstands Forces up to 200 lb
• Quick Release Button for Instant Access
• Slim Profile: 3.3" Length, Weighs 2.5 oz
• Security Lock Helps Prevent Accidents
• Anti-Slip Pad for Improved Stability
• Rust-Resistant Aluminum Construction
• Works with Most Other Peak Design Plates

This silver Clip for Capture v3 from Peak Design serves as a replacement part or as an additional support point for the Capture v3 harness system. By equipping more than one bag or strap with Capture clips, you can carry several cameras at once or switch between the two clips easily for comfortable and versatile use. Note that a plate is not included with this product, and must be purchased separately in order to carry equipment.

Keeping a slim profile at only 3.3" in length and weighing just 2.5 oz, the clip uses included thumbscrews or hex-head bolts to clamp onto any strap or belt as wide as 2.5" and as thick as 0.87". It is made of weatherproof aluminum to resist rust and is designed to withstand up to 200 lb of force. The clip is equipped with a quick release button so you can instantly grab your camera and start shooting, and it has a security lock that can be activated to prevent accidental release during longer trips. for enhanced stability, an anti-slip pad is used on the back plate for grip. All legacy Peak Design plates work with the Capture v3 clip except for the DUALplate v1, allowing you to carry objects such as lenses, binoculars, or GoPro cameras with optional accessories.

• Replacement or additional clip for Capture v3 system, plate must be purchased separately in order to carry equipment
• Made entirely of rust-resistant aluminum and designed to withstand up to 200 lb of force
• Fits straps or belts up to 2.5" wide, and as thick as 0.63" with thumbscrew bolts or up to 0.87" thick with hex-head bolts
• Anti-slip pad for better grip on the mounting surface, increasing stability
• Quick release button for swift and easy access to camera
• Security lock prevents accidental release for safety during longer excursions
• Slim design with a length of 3.3" and a weight of 2.5 oz
• Compatible with all Peak Design plates except for the DUALplate v1, allowing for objects such as GoPro, lenses, and binoculars to be used with optional accessories

Peak Design CP-BK-3 Overview

Key Features

• Clip Only, Replacement or Extra Part
• For Straps up to 2.5" Wide & 0.87" Thick
• Withstands Forces up to 200 lb
• Quick Release Button for Instant Access
• Slim Profile: 3.3" Length, Weighs 2.5 oz
• Security Lock Helps Prevent Accidents
• Anti-Slip Pad for Improved Stability
• Rust-Resistant Aluminum Construction
• Works with Most Other Peak Design Plates

Marrying stability and quick access, the black Capture Camera Clip v3 from Peak Design is a harness system for professional gear that is designed to withstand forces up to 200 lb. The main component is a durable metal clip, which uses included thumbscrews or hex-head bolts to clamp onto any strap or belt as wide as 2.5" and as thick as 0.87". Paired with it is an Arca-type compatible quick release plate that slides onto the clip to lock movement in all four directions, and features four loops for attaching optional Peak Design anchors.

The Capture v3 keeps a slim profile at only 3.3" in length and weighing 3 oz, and all its parts are made of weatherproof aluminum that resists rust. The clip is equipped with a quick release button so you can instantly grab your camera and start shooting, and has a security lock that can be activated to prevent accidental release during longer trips. for enhanced stability, an anti-slip pad is used on the back plate for grip. All legacy Peak Design plates work with the Capture v3 except for the DUALplate v1, allowing you to carry objects such as lenses, binoculars, or GoPro cameras with optional accessories.

• Clip and plate system for camera support, made entirely of rust-resistant aluminum and designed to withstand up to 200 lb of force
• Clip fits straps or belts up to 2.5" wide, and as thick as 0.63" with the thumbscrews and up to 0.87" thick with the hex-head bolts
• Anti-slip pad for a better grip on the mounting surface, increasing stability
• Plate is compatible with most Arca-type tripod attachments and releases with a button on the clip for quick access to camera
• Four loops at the bottom of the plate allow for optional Peak Design anchors to be used
• Quick release button can be locked to help prevent accidents during longer excursions
• Slim design with a length of 3.3" and a total weight of 3 oz
• Compatible with all Peak Design plates except for the DUALplate v1, allowing for objects such as GoPro, lenses, and binoculars to be used with optional accessories