Ideal for versatile, immersive capture of musical ensembles and audio for VR, the Zoom H2n portable handheld recorder with an onboard 5-mic array lets you record high-resolution stereo or surround sound audio in the palm of your hand. Make aurally exciting music tracks and create captivating sound beds with nothing more than the H2n.
Like other H-Series Handy recorders such as the H5 and H6, you can hold it in your hand, attach it to a mic stand or tripod, or mount it to a camera (shoe mount available separately); the H2n's multichannel capabilities and rugged, travel-friendly body make it more than ready to meet the varied demands of YouTube content creators, musicians, sound recordists, and more.
From its long battery life to its Spatial Audio support, the H2n is well equipped for tracking live music, recording sound effects and ambience, or producing sound for 360 VR videos. It can supply plug-in power for a lavalier condenser mic, or even accept a direct line-level connection from a mixer or wireless receiver. No matter the source, Selectable auto-recording and pre-recording ensure that you'll never miss the start of a take.
The H2n's onboard 5-mic array opens the door to true stereo or surround sound recording without external microphones. The built-in microphonestwo form an X/Y pair, while the other three are configured in a mid-side patterncan be used separately for X/Y or MS stereo recording, or combined to create 2- or 4-channel surround sound. A simple dial atop the grille grants effortless switching between the four modes.
X/Y mode utilizes two matched unidirectional mics set at a 90 angle (relative to each other) for clear, phase-accurate capture with a tight stereo image. MS mode employs one forward-facing mic and two side-facing mics to simultaneously capture direct signal and ambience while providing optimal stereo-to-mono compatibility. The H2n's internal MS decoder allows you to adjust the relative level of the mic element before or after the recording process, effectively manipulating the perceived stereo width.
Use 2ch mode to create a single stereo file of the combined mics, or Select 4ch mode to record the signal from the H2n's X/Y mics onto one stereo track and signal from the MS mics onto another. The resulting pair of tracks can then be routed to separate speakers for an immersive listening experience or can be blended into a custom stereo track. In addition, the H2n's MS decoding feature can be used to independently alter the level of the Side signal in both 2ch and 4ch modes.
Using Spatial Audio mode, you can create a single 4-channel, multi-track WAV file that includes omni, left/right, and forward/backward tracks. This Spatial Audio file is then ready to be combined with 360 VR videos recorded with the Google Jump-compatible camera rig (such as the GoPro Odyssey or Ricoh Theta). Once completed, the immersive videos are ready to upload to YouTube.
Thanks to a 3.5mm stereo mini-jack input that supplies 2.5V plug-in power, the H2n can accommodate an external condenser microphone such as a clip-on lavalier for crisp, close-miked speech reproduction. Plugging in an external source to the 3.5mm jack overrides the onboard X/Y stereo mic, so no menu-based input Selection is required. Since the 3.5mm input also supports line-level signal, you can route the output of a wireless microphone receiver into the H2n.
Maximize portability by recording directly to a separately available SD/SDHC card (up to 32GB capacity). A 4GB card will yield over three hours of 4-channel recording at 16-bit / 44.1 kHz resolution using the BWF-compliant WAV format for uncompressed audio quality and industry-standard file compatibility.
Alternatively, use the H2n as a USB microphone, or as a 4-in/2-out USB 2.0 audio interface at up to 16-bit / 48 kHz. The USB port also enables the H2n to be used as a card reader for fast file transfers.
The 3.5mm line/headphone mini-jack output features a dedicated volume control, making it capable of feeding your camera/DSLR or a pair of headphones. A built-in monophonic speaker on the back of the H2n makes it easy to review your recordings to make sure everything has been captured properly.
Portable Recorder
Number of Tracks | 4 |
Max Sample Rate/Resolution | 96 kHz / 24-Bit |
Microphone | Built-In 5-Mic Array, Mid/Side and X/Y Configurations |
Built-In Speaker | Yes, 400 mW Mono |
Display | 1.8" / 4.57 cm Monochrome LCD (Backlit) |
Memory Card Support | SD (16 MB to 2 GB) SDHC (4 GB to 32 GB) |
Internal Storage | None |
Recording
Audio File formats | BWF, MP3, WAV |
Sample Rates | WAV: 44.1 / 48 / 96 kHz MP3: 44.1 / 48 kHz |
Bit Depth | 24-Bit (AD/DA Conversion) 32-Bit (Internal DSP) |
Bit Rates | 48 to 320 kb/s (Record) 32 to 320 kb/s (Playback) |
Signal Processing | Auto Gain, Compressor, Limiter, Low-Cut Filter, Pitch Control |
Timecode | No |
Recording Time | MP3 128 kb/s: 17 Hrs 21.5 Mins per GB (Stereo) MP3 320 kb/s: 6 Hrs 56.5 Mins per GB (Stereo) WAV 44.1 kHz/16-Bit: 1 Hr 34 Mins per GB (Stereo) 47 Mins per GB (All Channels) WAV 48 kHz/24-Bit: 57.5 Mins per GB (Stereo) 28.5 Mins per GB (All Channels) WAV 96 kHz/24-Bit: 28.5 Mins per GB (Stereo) |
Connectivity
Analog I/O | 1 x 1/8" / 3.5 mm TRS Female Unbalanced Line/Mic Input 1 x 1/8" / 3.5 mm TRS Female Unbalanced Headphone/Line Output 1 x 2.5 mm TRRS Female Remote Input |
Digital I/O | None |
Phantom Power | None |
Plug-In Power | Yes, 2.5 V |
Host Connection | 1 x Mini-USB (USB 2.0) |
Performance
Gain Range | 0 to +39 dB |
Headphone Output Power | 20 mW per Channel into 32 Ohms |
Impedance | Mic/Line Inputs: 2 kOhms Outputs: &10 kOhms |
Microphone Max SPL | 120 dB |
Power
Power Options | Batteries, USB Bus Power, AC/DC Power Adapter |
Battery Type | 2 x AA (Included) |
Approximate Battery Life | WAV 44.1 kHz/16-Bit: 20 Hours (Alkaline) |
AC/DC Power Adapter | 5 VDC at 1 A (Not Included) |
Physical
Mounting Options | 1/4"-20 Female |
Dimensions | 2.7 x 4.5 x 1.7" / 67.6 x 113.9 x 42.7 mm |
Weight | 4.6 oz / 130 g (without Batteries) |
Packaging Info
Package Weight | 0.8 lb |
Box Dimensions (LxWxH) | 6.2 x 5.9 x 2.7" |