Key Features
Designed for people who require two inputs with little fuss, the Saramonic SmartRig+UC is an interface with a USB Type-C connection for compatible devices, such as computers, tablets, and smartphones. Inputs through two combination inputs outfitted for both XLR or 1/4" connections as well as two 3.5mm inputs for line-level sources are provided.
Two accessible gain knobs control the levels of each input. A mono/stereo switch controls the mode of operation, while a REC/PLAY switch is on hand to determine if you're in recording or playback mode. Monitoring is accomplished by means of the 3.5mm headphone output. Thanks to the unit's 9V battery, the SmartRig+UC can power two condenser microphones with selectable 48V phantom power. The SmartRig+UC also features a 3/8 thread on the rear of the unit to give you rigging options, as well as a strap.
Form Factor | Desktop |
Channels of I/O | Analog: 4 Input / 1 Output Digital: 0 Input / 2 Output |
Maximum Sampling Rate | 48 kHz / 16-Bit |
Number of Microphone Preamps | 2 Preamps |
Built-In Microphone | Yes |
Expansion Slots | None |
Signal Processing
Pad | None |
Gain/Trim Range | +20 dB |
Connectivity
Analog Audio I/O | 2 x Combo XLR-1/4" TS Balanced/Unbalanced Mic/Hi-Z Input 2 x 1/8" / 3.5 mm TRS Balanced Line Input 1 x 1/8" / 3.5 mm TRS Unbalanced Headphone Output |
Phantom Power | 48 V (Applied to All Inputs) |
Digital Audio I/O | None |
Host Connection / USB | 1 x USB Type-C |
Host Connection Protocol | USB 3.0 / 3.1 Gen 1 |
MIDI I/O | None |
Performance
Frequency Response | System: 20 Hz to 20 kHz ±0.5 dB |
SNR | 80 dB |
THD | Inputs: < 0.01% |
Digital Audio
Sync Sources | None |
Compatibility
Required Hardware | USB Cable (Not Included) |
Power
Power Requirements | Battery |
Battery Type | 1 x 9V |
Physical
Anti-Theft Features | None |
Dimensions | 4.72 x 1.57 x 1.57" / 119.89 x 39.88 x 39.88 mm |
Weight | 4.6 oz / 130.0 g |
Packaging Info
Package Weight | 0.355 lb |
Box Dimensions (LxWxH) | 7.65 x 5.35 x 1.9" |