copyright © 2023 PT Global Sukses Digital
Key Features
Combining a redesigned true condenser capsule, ultralow-noise transformerless circuitry, and an extremely durable housing, the Rode NT1-KIT large-diaphragm cardioid microphone is well suited for high-resolution digital recording of vocal and instrument sources at home, in the studio, or even on stage. Plus, its bundle of accessories—shockmount, pop filter, XLR cable, and dust cover—help the NT1-KIT serve singers, rappers, and podcasters especially well.
While the body of the NT1 still resembles the NT1-A, the mic has been completely revamped except for the mesh grille. It features Rode's updated HF6 capsule, which is designed to provide a detailed midrange response with smooth highs and warm bass. The HF6 capsule is suspended inside the microphone using Rycote's industry-leading Lyre system to help reduce vibration and handling noises. Also, with self-noise measured at only 4.5 dBA, the NT1 is an exceedingly quiet microphone. Since it can run on 24 or 48 VDC phantom power, the NT1 can be used with a variety of professional and entry-level XLR mic preamps
Although the body of the NT1 closely resembles the NT1-A, the microphone has been completely redesigned from the ground up, with the only shared component being the mesh grille. Rode's design engineers approached the NT1 as a marriage of innovation and tradition, starting with the capsule, which is a completely new design. Codenamed the HF6, it is the perfect example of Rode's fusion of artistic design approaches and cutting-edge manufacturing techniques, and features a sound signature reminiscent of the famous microphones of old while at the same time exhibiting extremely low noise.
It has been developed with a focus on detailed midrange response, coupled with silky smooth high frequencies, and warm, round bass reproduction to make the NT1 an absolute standout in its class.
The transducer itself is suspended inside the microphone using Rycote's industry-leading Lyre system, minimizing external vibrations at the capsule level. The capsule is then married to high-grade electronics that have been designed to provide an extremely low noise level. The NT1 is an incredibly quiet microphone, measuring only 4.5 dBA of self-noise.
The NT1's body is machined from 6061 aluminum and then nickel plated for resistance against corrosion. Finally it is coated in a durable, military-grade ceramic layer, using advanced electrostatic application techniques developed by Rode to ensure an extremely hard wearing finish that is resistant to scratches or marks.
The NT1 is supplied with the SM6, a high-quality suspension shockmount that provides isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone. It includes a removable pop shield with two axes of adjustment and a telescopic arm for ultimate application versatility. The mic also comes with a balanced XLR microphone cable.
Microphone
| Primary Applications | Live Sound, Studio Recording |
| Form Factor | Large Diaphragm Mic / Stand/Boom Mount |
| Intended Sound Sources | Vocals, Speech/Voice Over, Instrument |
| Sound Field | Mono |
| Operating Principle | Pressure Gradient |
| Capsule | 1 x Condenser |
| Diaphragm | 1" / 25.40 mm |
| Polar Pattern | Cardioid |
| Orientation | Side Address |
| Circuitry | Solid-State (JFET) |
| Pad | None |
| High-Pass Filter | None |
| Tone Adjustment | None |
| Gain Adjustment | None |
| Indicators | None |
| On-Board Controls | None |
| Windscreen | None |
Performance
| Frequency Range | 20 Hz to 20 kHz |
| Maximum SPL | 132 dB SPL |
| Impedance | 100 Ohms |
| Sensitivity | -29 dBV/Pa at 1 kHz |
| Output Level | 8 mV (Max, 1 kHz) |
| Dynamic Range | 128 dB |
| Signal-to-Noise Ratio | 90 dB A-Weighted |
| Equivalent Noise Level | 4.5 dB A-Weighted |
Connectivity
| Output Connectors (Analog) | 1 x XLR 3-Pin Male (on Mic) |
| Headphone Connector | None |
Power
| Operating Voltage | 24 V (Phantom Power) 48 V (Phantom Power) |
Physical
| Color | Black |
| Mounting | Shockmount (Included) |
| Included Case | None |
| Included Filters | Pop Filter |
| Construction Material | Aluminum |
| Dimensions | ø: 2 x L: 7.4" / ø: 5 x L: 18.7 cm |
| Weight | 15.5 oz / 440 g |
Packaging Info
| Package Weight | 4.95 lb |
| Box Dimensions (LxWxH) | 10.5 x 8.25 x 6.75" |