Key Features
Use the A version of the Geartree Desk Studio Set from Falcam to build your personalized content creation setup while saving valuable desk space. The main desk stand clamps to your table and has a load capacity of 88 lb. Various clamps and extension arms are compatible with 5/8" studs to attach boom microphones, fill lights, and cameras to the apparatus. An aluminum alloy and steel construction ensures the set is durable and can withstand the mounting of multiple accessories.
The Clamp Version Geartree Desk Stand Mount from Falcam attaches to your workspace using the integrated clamp to integrate various extension arms for accessories like monitors, lights, and microphones, to customize your content creation setup. Table tops up to 2.2" thick are compatible with the mount, and the total weight of equipment attached to the stand can reach 88.2 lb. Its aluminum alloy construction ensures a durable foundation for your podcasting or streaming gear configuration.
Connect this Falcam Full Motion Swivel Arm to your desk stand to mount and adjust fill lights or cameras for your content creation needs. One end of the swivel arm has a 5/8" stud and the other has a 5/8" receiver. It can support equipment up to 19.8 lb and it has a height adjustment range of up to 11.8". An aluminum alloy construction ensures it is durable and lightweight.
This Basic Extension Grip Arm from Falcam adds 10.6" of extension to the Geartree studio stand. It attaches using a standard 5/8" stud and has a 5/8" receiver with locking knob on the end. Up to three of the extension Grip Arms can be stacked and used to extend various types of equipment to broaden the shooting range.
This Articulated Boom Arm from Falcam adds an 18" articulated extension to the Geartree studio stand. The precision machined aluminum sections feature stainless steel springs that provide a a counterbalance load capacity of up to 2.27 pounds. The end of the boom arm features a mini ball head for adding a camera, microphone, compact light, monitor or more.
This Geartree Clamp with 5/8" Receiver from Falcam employs a clamping structure to fix accessories to a floor-to-ceiling stand, light stand, or desk stand to connect compatible brackets or arms. It features one 5/8" stud receiver and three wear-resistant POM ring adapters to fit 1.65, 1.57, and 1.38" diameters of round pipe.
Pan, tilt, or roll your camera with this Geartree 3-Way Roll Head from Falcam. A 1/4"-20 screw on the quick release plate is compatible with your DSLR camera up to 6.6 lb. The head attaches to the Falcam Geartree stands with the integrated pin and is compatible with F22 and F38 quick release accessories thanks to its quick release mount. Adjusting the position of your camera is a breeze with the built-in handle and bubble level. Tightening the side knob can adjust the tension or lock the head entirely. Its aluminum alloy construction creates a durable and lightweight design.
This Reversible Mounting Stud for Geartree from Falcam allows the Basic Extension Grip Arm and Full Motion Swivel Arm accessories from the Geartree system to be attached to any available mounting holes. The standard dimension adapter allows other brand adapters to also be attached to the Falcam Geartree. This stud is compatible with 5/8" receivers and is reversible. This mounting stud is machined from stainless steel.
Key Features
Use the B version of the Geartree Desk Studio Set from Falcam to build your personalized content creation setup while saving valuable desk space. The main desk stand clamps to your table and has a load capacity of 88 lb. Various clamps and extension arms are compatible with 5/8" studs to attach boom microphones, fill lights, and cameras to the apparatus. A VESA mount adapter can mount your monitor onto the stand, and a rectangular table top can keep your switcher or stream deck off your desk's surface. An aluminum alloy and steel construction ensures the set is durable and can withstand the mounting of multiple accessories.
The Clamp Version Geartree Desk Stand Mount from Falcam attaches to your workspace using the integrated clamp to integrate various extension arms for accessories like monitors, lights, and microphones, to customize your content creation setup. Table tops up to 2.2" thick are compatible with the mount, and the total weight of equipment attached to the stand can reach 88.2 lb. Its aluminum alloy construction ensures a durable foundation for your podcasting or streaming gear configuration.
Connect this Falcam Full Motion Swivel Arm to your desk stand to mount and adjust fill lights or cameras for your content creation needs. One end of the swivel arm has a 5/8" stud and the other has a 5/8" receiver. It can support equipment up to 19.8 lb and it has a height adjustment range of up to 11.8". An aluminum alloy construction ensures it is durable and lightweight.
This Basic Extension Grip Arm from Falcam adds 10.6" of extension to the Geartree studio stand. It attaches using a standard 5/8" stud and has a 5/8" receiver with locking knob on the end. Up to three of the extension Grip Arms can be stacked and used to extend various types of equipment to broaden the shooting range.
This Articulated Boom Arm from Falcam adds an 18" articulated extension to the Geartree studio stand. The precision machined aluminum sections feature stainless steel springs that provide a a counterbalance load capacity of up to 2.27 pounds. The end of the boom arm features a mini ball head for adding a camera, microphone, compact light, monitor or more.
This Geartree Clamp with 5/8" Receiver from Falcam employs a clamping structure to fix accessories to a floor-to-ceiling stand, light stand, or desk stand to connect compatible brackets or arms. It features one 5/8" stud receiver and three wear-resistant POM ring adapters to fit 1.65, 1.57, and 1.38" diameters of round pipe.
Pan, tilt, or roll your camera with this Geartree 3-Way Roll Head from Falcam. A 1/4"-20 screw on the quick release plate is compatible with your DSLR camera up to 6.6 lb. The head attaches to the Falcam Geartree stands with the integrated pin and is compatible with F22 and F38 quick release accessories thanks to its quick release mount. Adjusting the position of your camera is a breeze with the built-in handle and bubble level. Tightening the side knob can adjust the tension or lock the head entirely. Its aluminum alloy construction creates a durable and lightweight design.
This Reversible Mounting Stud for Geartree from Falcam allows the Basic Extension Grip Arm and Full Motion Swivel Arm accessories from the Geartree system to be attached to any available mounting holes. The standard dimension adapter allows other brand adapters to also be attached to the Falcam Geartree. This stud is compatible with 5/8" receivers and is reversible. This mounting stud is machined from stainless steel.
This Geartree Clamp with Three 5/8" Receivers from Falcam employs a clamping structure to fix accessories to a floor-to-ceiling stand, light stand, or desk stand to connect compatible brackets or arms. It features three 5/8" stud receivers and three wear-resistant POM ring adapters to fit 1.65, 1.57, and 1.38" diameters of round pipe.
Mount your monitor on a Falcam desk stand with this VESA Mount Adapter. The mount is compatible with VESA 100 x 100 and 75 x 75 patterns and can accommodate monitors weighing up to 19.8 lb. A 5/8" stud on the opposite end of the adapter attaches to the desk stand. Its aluminum alloy construction makes the adapter lightweight and durable.
Attach this rectangular GearTree Table Top to the Falcam desk stand or studio stand and place a laptop, switcher, stream deck, or other accessories onto it for easy access. The integrated 5/8" stud at the bottom easily attaches directly to the GearTree basic extension arm or pneumatic arm. This 11 x 15.4" table top can support devices up to 44.1 lb. Its aluminum alloy construction ensures it is lightweight and durable.
Key Features
The GearTree Home Studio Set from Falcam combines multiple types of photographic equipment stands and mounts into one, with an integrated design for efficient use in small spaces. Cameras, microphones, monitors, lights, and other types of photographic equipment can be installed on the GearTree column, freeing up the space usually occupied by multiple stands so you can have a powerful shooting platform in a small room.
This Floor-to-Ceiling Stand from Falcam is part of the GearTree Home Studio System. This sturdy aluminum pole has an adjustable height and can be mounted in rooms with ceilings from 6.9' to 8.5' high. Once set in place, a variety of extension arms, pneumatic arms, and triangular extension arms may be attached to create a customized home studio with a tiny footprint.
NOTE: Not suitable for use in rooms with suspended ceilings.
This Extension Column for GearTree Stand from Falcam is a durable, lightweight aluminum column that adds 1.6 feet to the height of the GearTree Studio Stand for use in rooms with very high ceilings.
This Basic Extension Grip Arm from Falcam adds 10.6" of extension to the Geartree studio stand. It attaches using a standard 5/8" stud and has a 5/8" receiver with locking knob on the end. Up to three of the extension Grip Arms can be stacked and used to extend various types of equipment to broaden the shooting range.
This Geartree Clamp with Three 5/8" Receivers from Falcam employs a clamping structure to fix accessories to a floor-to-ceiling stand, light stand, or desk stand to connect compatible brackets or arms. It features three 5/8" stud receivers and three wear-resistant POM ring adapters to fit 1.65, 1.57, and 1.38" diameters of round pipe.
This Geartree Clamp with 5/8" Receiver from Falcam employs a clamping structure to fix accessories to a floor-to-ceiling stand, light stand, or desk stand to connect compatible brackets or arms. It features one 5/8" stud receiver and three wear-resistant POM ring adapters to fit 1.65, 1.57, and 1.38" diameters of round pipe.
This Articulated Boom Arm from Falcam adds an 18" articulated extension to the Geartree studio stand. The precision machined aluminum sections feature stainless steel springs that provide a a counterbalance load capacity of up to 2.27 pounds. The end of the boom arm features a mini ball head for adding a camera, microphone, compact light, monitor or more.
Attach this rectangular GearTree Table Top to the Falcam desk stand or studio stand and place a laptop, switcher, stream deck, or other accessories onto it for easy access. The integrated 5/8" stud at the bottom easily attaches directly to the GearTree basic extension arm or pneumatic arm. This 11 x 15.4" table top can support devices up to 44.1 lb. Its aluminum alloy construction ensures it is lightweight and durable.
Connect this Falcam Full Motion Swivel Arm to your desk stand to mount and adjust fill lights or cameras for your content creation needs. One end of the swivel arm has a 5/8" stud and the other has a 5/8" receiver. It can support equipment up to 19.8 lb and it has a height adjustment range of up to 11.8". An aluminum alloy construction ensures it is durable and lightweight.
Pan, tilt, or roll your camera with this Geartree 3-Way Roll Head from Falcam. A 1/4"-20 screw on the quick release plate is compatible with your DSLR camera up to 6.6 lb. The head attaches to the Falcam Geartree stands with the integrated pin and is compatible with F22 and F38 quick release accessories thanks to its quick release mount. Adjusting the position of your camera is a breeze with the built-in handle and bubble level. Tightening the side knob can adjust the tension or lock the head entirely. Its aluminum alloy construction creates a durable and lightweight design.
This Triangle Extension Arm from Falcam is a triangular-shaped arm for use with the the GearTree Home Studio floor-to-ceiling stand. This 32.3" long arm connects to the stand's center column with two mount adapters and has a 66.1 lb load capacity. The end of the arm features dual 5/8" receiver sockets
NOTE: Not for use with desk studio products.
This Reversible Mounting Stud for Geartree from Falcam allows the Basic Extension Grip Arm and Full Motion Swivel Arm accessories from the Geartree system to be attached to any available mounting holes. The standard dimension adapter allows other brand adapters to also be attached to the Falcam Geartree. This stud is compatible with 5/8" receivers and is reversible. This mounting stud is machined from stainless steel.
Key Features
This F22 Quick Release Bundle from Falcam provides you with a quick release set to integrate with your camera mounting system. Both base and plate are compatible with other Falcam F38 accessories and made from aluminum alloy and steel. A 1/4"-20 screw inserts to the bottom of your camera, and a universal thread can attach the system to a mount of your choice.
This F38 Quick Release Top Plate from Falcam integrates a standard quick release plate to your camera for use with other F38 quick release bottom plates for efficient transitioning between mounting devices. The plate has one fixed screw to secure your camera and make transitioning from handheld to tripod shooting a breeze. Its aluminum alloy construction creates a durable and lightweight design.
The F38 Quick Release Bottom Plate from Falcam integrates a standard quick release mounting plate to your gear configuration for efficient transitioning between mounting devices. The mounting base has one thread that is compatible with both 1/4"-20 and 3/8"-16 screws for attaching to a tripod or gimbal. Use with the separately available quick release plate allows for a seamless transition from handheld to mounted shots with a press of the single-button release. Its aluminum alloy and stainless steel construction ensures a lightweight and durable design.
Key Features
The F38 QR System from Falcam is a quick release system designed to mount your camera to your backpack strap. It is ready to install and integrates a mortise and tenon system with a modern mechanical structure. A push button allows you to install and remove your gear, as well as switch between different types of equipment, to make shooting easier and faster. A nested structure with concave and convex joints allows gear to be securely fastened without the use of screws.
Three-point fixing and knob locking make the F38 more stable and sturdy, and the quick release plates fit seamlessly, maintaining excellent stability even in running, hiking, off-roading, and other strenuous activities.
With high precision CNC machining, the surface is atomized sandblasted and anodized with durable, high structural strength.
Durable, lightweight aluminum alloy is lighter and more compact.
Three-point force sharing reduces the shoulder load, making shooting easier.
The F38 Quick Release System is small but has a strong and reliable load-bearing capacity.
Key Features
The F38 Quick Release System for Shoulder Straps from Falcam lets you attach your camera to most shoulder straps and remove it by push-button quick release. It consists of a shoulder strap buckle and a top plate with a 1/4"-20 camera screw, both Arca-compatible. The buckle features four slots for securing your shoulder strap. The top plate attaches to the buckle by quick release and removes at the push of a button. With an integrated Arca-type dovetail, the top plate can be mounted directly on Arca-compatible tripods and ball heads when removed from the shoulder strap buckle.
Key Features
Integrate a universal Arca-swiss slot, quick release compatible baseplate into your DJI RS 2 or RSC 2 gimbal configuration using this Falcam F38 Quick Release System. A gimbal-specific quick release base mount and anti-deflection top plate allow you to transition from your gimbal to handheld or other Falcam F38 compatible mounts quickly and efficiently.
The top plate has both a 1/4"-20 and an M3 screw for attaching to your camera. The integrated positioning post can be adapted using the included baffle. M4 threads on the base mount allow you to attach additional accessories and support your lens or follow focus. Its aluminum alloy construction creates a durable and lightweight design.
Key Features
Integrate a universal Arca-swiss slot, quick release compatible baseplate into your Zhiyun WEEBILL-S or CRANE 2S gimbal configuration using this Falcam F38 Quick Release System. A gimbal-specific quick release base mount and anti-deflection top plate allow you to transition from your gimbal to handheld or other Falcam F38 compatible mounts quickly and efficiently.
The top plate has both a 1/4"-20 and an M3 screw for attaching to your camera. The integrated positioning post can be adapted using the included baffle. M4 threads on the base mount allow you to attach additional accessories and support your lens or follow focus. The system supports both horizontal and vertical shooting. Its aluminum alloy construction creates a durable and lightweight design.
Key Features
Integrate this Falcam F38 Quick Release Bundle with your Zhiyun-Tech CRANE-M3 gimbal stabilizer to add quick release capabilities and reduce the need to rebalance your rig every time you remove your camera. The F38 quick release plate features a 1/4"-20 screw and M3 thread to secure to your DSLR camera. The mounting plate it attaches to can be adjusted horizontally to properly balance your gimbal. Knobs along the mount ensure your adjustments remain set in place.
Key Features
This F22 Quick Release Bundle from Falcam provides you a complete quick release set to integrate with your camera mounting system. Both the base and plate are compatible with other Falcam F22 accessories and are made from aluminum alloy. A 1/4"-20 screw inserts into the bottom of your camera, and a 1/4"-20 thread can attach the system to a tripod or other mount.
This F22 Basic Quick Release Plate from Falcam integrates a standard quick release plate to your camera for use with other F22 quick release bottom plates for efficient transitioning between mounting devices. The plate has one fixed 1/4"-20 screw to secure your camera. Rubber padding on the plate prevents scratching the camera's surface. Two positioning pins allow the plate to be more securely installed to the mount of your choice.
This F22 Basic Quick Release Mounting Base from Falcam integrates a standard quick release mounting base to your gear configuration for efficient transitioning between mounting devices. The mounting base has one 1/4"-20 thread to attach to a tripod or gimbal and a single-button release. Use with the separately available quick release plate allows for a seamless transition from handheld to mounted shots. Its aluminum alloy construction ensures a lightweight and durable design.
Key Features
Turn a Falcam F22 quick release bade into a cold shoe mount with this F22 Cold Shoe Mount Adapter. One end of the adapter is a quick release plate compatible with F22 accessories. The other is a cold shoe mount with a single-button release for the quick mounting of cold shoe compatible accessories like fill lights and monitors. A 1/4"-20 thread tightens the device. Its aluminum alloy construction creates a durable and lightweight design.
Key Features
Turn a Falcam F22 quick release base into a cold shoe with this F22 Quick Release Plate to Cold Shoe Adapter. One end of the adapter is a quick release plate compatible with F22 accessories. The other has a cold shoe for integration with cold shoe mounting slots. A 1/4"-20 thread tightens the adapter once in place. Its aluminum alloy construction creates a durable and lightweight design.
Key Features
The Falcam F22 Quick Release Pan Head and Quick Release Plate is an adjustable pan head with an included quick release plate for mounting Falcam F22 accessories. An integrated cold shoe attaches the device to your camera. The 180° of tilt and 360° of pan adjustment are controlled and locked into place with a knob at the side of the head. Another knob at the base of the head can be adjusted for the three modes of operation: dampening mode for still shooting, click mode for gentile motion shooting, and lock mode for fast shooting.
A 1/4"-20 screw on the quick release plate attaches to your accessory of choice with compatible threads. Multiple built-in 1/4"-20 threads expand its mounting options. Its aluminum alloy construction ensures a durable and lightweight design.
Key Features
The Falcam F22 Quick Release Tilt Head with Dual Quick Release Plates is an adjustable tilt head with two included quick release plates for mounting Falcam F22 accessories. The head can tilt 180° and attaches to your camera cage with a 1/4"-20 screw. Another 1/4"-20 screw mounts fill lights or secondary monitors to your device. Its aluminum alloy construction ensures a durable and lightweight design.
Key Features
Outfit your Sony a1, a7 III, a7S III, or a7R IV camera with an ergonomic, aluminum alloy cage using the Quick Release Camera Cage from Falcam. Its custom-fit design maintains access to your camera's controls and ports. Multiple 1/4"-20 and 3/8"-16 ARRI-style threads allow you to mount articulating arms and secondary monitors on your rig. A cold shoe mount allows you to attach a shotgun microphone or fill light. This cage is compatible with Falcam F22 and F38 quick release accessories for single-button integration of additional arms and adapters to increase your mounting options.
Key Features
Use this 4.5" F22 Quick Release Suction Cup Mount from Falcam to mount a camera up to 6.6 lb onto smooth surfaces like glass. Pump-activated vacuum suction can support a maximum vertical force of 88.2 lb and a horizontal force of 132.3 lb. Multiple 1/4"-20 and 3/8"-16 threads, a 3/8"-16 to 1/4"-20 thread adapter, a 3/8"-16 to 1/4"-20 screw, and a dual 3/8"-16 screw allow for the integration of articulating arms, ball heads, or other accessories to the mount. A quick release mount accepts compatible Falcam F22 accessories for easy transition from handheld to mounted shooting.