SWIT PC-P461 Overview

Key Features

• 4-Bay V-Mount Charger
• Simultaneous Fast Charging
• 3A/6A Charging Output, 100W
• 3.5" LCD, LED Indicators
• Built-In Carrying Handle
• Worldwide Compatible 90-240 VAC Input

This PC-P461S 4-Bay Simultaneous Battery Charger from SWIT can charge four V-mount batteries simultaneously for super-fast charging speeds. Charge 14.4V and 28.8V nominal voltage batteries at 100W/6A or 100W/3A fast charging rates and save up to 60% charging time in comparison to other models. The charger is compatible with V-mount SWIT and Sony batteries. A built-in 3.5" LCD and LED light indicators make for easy monitoring of each battery's status.

3.5" Color LCD and LED Indicators

The charger provides a 3.5" color LCD panel to display charging progress, charging current, voltage, and battery cycle times for each channel. Four large LED indicators on the top of the charger can also display the charging status.

Lightweight and Portable

The 4-channel fast charger has a lightweight and portable form factor with an integrated handle design for easy transporting.

Fast Charging Times

The charger can fully charge a 160Wh battery in 2.6 hours using 6A fast charging.

Charging Outputs

• SWIT 14.4V ≥160Wh batteries: 16.8V at 6A
• SWIT 28.8V ≥160Wh batteries: 33.6V at 3A
• Other batteries: 16.8V at 3A

SWIT OMNI-99S Overview

Key Features

• 99Wh V-Mount Battery
• 150W, 12A High-Load Output
• D-Tap, Barrel, USB-A, and USB-C Ports
• USB-C PD Fast Charging
• LED Display with Onboard Button
• Multiple Protections

The V-mount OMNI-99S 99Wh Pocket Battery from SWIT easily powers your cine rigs and high-power LED lights on set while remaining ultracompact. The V-mount battery features a 99Wh capacity with a 150W at 12A high-load output. D-Tap, Barrel, and USB-A output ports offer alternative ways to power your on-camera monitor, fill lights, and mobile devices.

A USB-C input/output port can be used to power your mirrorless/DSLR camera or laptop. It also supports PD fast charging when the battery is depleted. An LED display shows the remaining power percentage, runtime, and even which ports are being utilized. Press the onboard button to display the battery's health level. Multiple internal protections ensure the battery is safe from overtemperature, short circuiting, and overvoltage charging, amongst other dangers.

FXLion NANOFX6 V-Mount Convert DC Connection to Power Camera

he NANO plate for the Sony ILME-FX6 can be directly attached onto the top of the camera. It has an integrated cable to connect it to the camera. There is an additional D-Tap output to power your accessories.

The NANO plate works with all regular 14.8V batteries. We are recommending, using the NANO TWO battery for maximum power.

FXLion NANOFX9 V-Mount Convert DC Connection to Power Camera

This NANO Plate is designed to power the Sony PXW-FX9 Camera over V-Mount. A built in camera connection cable is included.

FXLion NANO4S-NANO 4-Channel Charger

This 4-CH Charger is designed for the NANO series, as it is very compact and lightweight. Features simultaneous charging of all channels. The charging output is 1 Amp per channel.

You can also use it with normal batteries, please be aware that you can only put two normal V-Mount batteries onto the charger, as the space is too short for two on each side.

If you only put one battery on each side, the charger charges those with 2 Amps. Four batteries are charged with 1 Amp per channel.

FXLion – 4-ch V mount charger
Indicator: L1 for CH1 and CH2, L2 for CH3 and CH4FX-NANO4S applied for Fxlion NANO V-lock batteries.
Tiny size, portable to carry
L1/L2 charge one battery separately, fast charging current 2A; Charge two batteries, charging current 1A.

Input: 100～240VAC 47～63Hz

CH1+CH2 Charging Output: 16.8V/2A

CH3+CH4 Charging Output: 16.8V/2A

Power: 80W

Indicator: L1 for CH1 and CH2, L2 for CH3 and CH4

FX-NANO4S applied for Fxlion NANO V-lock batteries.

Tiny size, portable to carry

L1/L2 charge one battery separately, fast charging current 2A; Charge two batteries, charging current 1A.

Advantages

Trustworthy professional factory, 20 years experience of manufacturing li-ion battery in broadcast industry.

Own-design inside circuit board, quality controllable.

Reliable cooperator of you!

Smallest 4-ch charger on the market!

Fxlion NANOLNP Overview

Key Features

• Power L-Series/NP-F Camera
• Compatible with Nano One and Nano Two
• One 14.8 VDC D-Tap Output
• For Devices that Require 6-18 VDC Input
• Quick Release Button

Power your L-series/NP-F camera or accessory with a Nano One or Nano Two V-mount battery using this V-Mount to L-Series Battery Converter Plate from Fxlion. This converter mounts onto your camera with an L-series mount that accepts 6 to 18 VDC batteries. The other side of the mount features a V-mount plate that accepts an Fxlion Nano One or Nano Two battery and passes the power through the plate to the camera. The plate also features a 14.8 VDC D-Tap output to power additional accessories.

Compatibility

Nano One and Nano Two batteries

FXLion NANOL2S-C Use Two NANO Batteries

This NANO Series V-Mount Plate allows for the use of two NANO ONE or NANO TWO batteries on one plate, providing double the capacity of a single battery. The two batteries discharge simultaneously, making it a convenient solution for equipment that requires a larger power source. This plate is compatible with any V-Mount equipment and features three D-Tap outputs for added versatility.

The front plate of the NANO Series V-Mount Plate is specifically designed to accommodate two NANO batteries, while the UPS control is located inside. This compact plate offers a practical solution for those in need of extended battery life without the added bulk of traditional V-lock batteries. For optimal performance, it is recommended to use two batteries of the same capacity to ensure equal discharge.

Nikon MH-33 Overview

Key Features

• USB Type-C Interface
• Charge Status Indicator Lights

The Nikon MH-33 Battery Charger supports a single EN-EL18d, EN-EL18c, or EN-EL18b battery. It features a USB Type-C interface and requires a USB Type-C cable and standard USB wall plug charger, both sold separately. Charging status is confirmed via LED indicator lights.

Sony BP-U Overview

Key Features

• For Select Sony Camcorders (FS7, Etc.)
• 35Wh Capacity
• Communication to Viewfinder
• 4-LED Gauge

The Sony BP-U35 is a high-performance 35Wh lithium-ion battery compatible with select Sony professional video cameras, such as the FS7 (see below). It's designed to communicate status data to the camera, and remaining capacity is displayed on the camera's viewfinder. This battery is rechargeable in approximately 90 minutes using the optional BC-U1A/U2A charger. A 4-LED gauge displays remaining capacity as 20, 40, 60, and 80%.

Compatible Camcorders

• PXW-FS7M2
• PXW-FS7
• PXW-FS5M2
• PXW-FS5
• PXW-X160
• PXW-X180
• PXW-X200
• PXW-Z190
• PXW-Z280
• PMW-300K1

Paket Charger + Baterai NP-F750/770

Charger ini memiliki 2 slot untuk baterai kamera DSLR Sony seri NP-F970, F750, dan F550. Terdapat layar LCD yang dapat menampilkan indikator baterai sewaktu pengisian. Anda tak perlu khawatir saat menggunakan charger KingMa karena sudah memenuhi standar keamanan untuk barang elektronik. Buat kegiatan fotografi Anda lebih nyaman dengan membawa charger kamera dari KingMa

Fitur

GoPro ACDBD-001 Overview

Key Features

• Dual USB Charger with 1600mAh Battery
• Prioritized, Sequential Charging
• Status Indicators
• USB Type-C Cable Included

The GoPro Dual Battery Charger with Rechargeable Battery bundle features a dual charger and a standard 1600mAh battery to power your GoPro MAX 360 camera. The charger allows you to charge a single battery or two batteries sequentially. It charges the battery with the most remaining runtime first to provide you with a fully charged battery as soon as possible. Separate LED indicators confirm the charging status of each battery. The charger plugs into a USB power source and a compatible USB Type-C cable is included.

Key Features

• Dual USB charger and 1600mAh battery
• Charger prioritizes batteries
• Status indicators
• USB Type-C cable included

RODE WIGOIICHARGINGCASE Overview

Key Features

• For Wireless GO II Microphone System
• Fits Transmitters and Receiver
• Integrated Battery: 2 Full Charges
• Up to 30 Hours of Continuous Use
• Rugged Enclosure and Zip System
• Charges & Protects for Storage/Transport

Keep your Wireless GO II microphone system safe and fully powered with the Wireless GO II Charging Case from RODE, a handy accessory that features a rechargeable internal battery that can facilitate up to two full recharges for up to 30 hours of continuous use in the field. This case accommodates both transmitters as well as the receiver. And with a rugged enclosure and zipper system, it simultaneously provides power and protection when your Wireless GO II system is in transit or storage.

DJI MINI 4 PRO 360-DEGREE PROPELLER GUARD Overview

Key Features

• For DJI Mini 4 Pro Drones
• 360° Coverage around Propellers
• Protect People & Property from Harm

For additional safety when flying indoors or near people, use the 360° Propeller Guard for Mini 4 Pro from DJI. The guard fully surrounds the Mini 4 Pro's spinning propellers, protecting bystanders and property from direct contact with the propellers in the case of an accident. Please note that the Mini 4 Pro must have firmware v01.00.0100 or later, built-in obstacle avoidance can no longer be used with the guard installed, and the guard can't be used with the Intelligent Flight Battery Plus due to weight considerations.

DJI MINI 4 PRO INTELLIGENT FLIGHT BATTERY Overview

Key Features

• For DJI Mini 4 Pro Drones
• 2590 mAh Power Capacity
• Up to 34 Minutes of Flight Time
• 58 to 70 Minutes of Charging Time

The DJI Intelligent Flight Battery for Mini 4 Pro is an essential accessory for the Mini 4 Pro. It has 2590 mAh of capacity, which provides up to 34 minutes of flight time on a full charge. When recharging the battery with the optional 30W USB-C charger, a full charge takes up to 58 minutes when the battery is inserted into the optional two-way charging hub, or up to 70 minutes when left inside the drone.

DJI Mavic 3 Hub Overview

Key Features

• For Mavic 3 Intelligent Flight Batteries
• Charge up to 3 x Mavic 3 Batteries
• Charges Batteries in Sequence
• Requires DJI 100W Portable Charger

Conveniently recharge up to three batteries unattended with this 100W Battery Charging Hub for Mavic 3 Intelligent Flight Batteries from DJI. Insert up to three Mavic 3 Intelligent Flight Batteries (not included) and plug this adapter into an available AC outlet. The hub will provide 100W of power and efficiently recharge all batteries in sequence. This means the hub will charge batteries in order of how much power they contain, starting with the battery that's charged the most. Charging this way will get you back in the air with a full battery as quickly as possible. Please note that the DJI 100W portable charger is required and not included.

Note:

The DJI 100W portable charger is required and not included.

Takara Battery NP-F970/F990T 7500mAh QC 18W

7500mAh, QC 18W input
Decoded Battery For Camera and Light, Powerbank, USB Type-C input, USB Output

Takara Battery for Sony NP-F970 F990T F960 F770 F550 Baterai

Jupio JDC0105 Overview

Key Features

• Dual Charger for BP-955/BP-975 Batteries
• Micro-USB and USB Type-C Power Inputs
• USB Type-A Output for Mobile Devices
• Bright LCD Screen

The Jupio Duo Charger for RED KOMODO Batteries supports two Canon BP-955/BP-975 batteries that the KOMODO uses, which are available from Canon, Jupio, and other brands. Featuring micro-USB and USB Type-C input ports, it connects to any USB wall plug charger using an optional micro-USB or Type-C cable. There's also a USB Type-A output for charging mobile devices. A bright LCD screen allows you to easily see the charging status of your batteries, even in difficult lighting conditions.

Insta360 CINAQBT/A Overview

Key Features

• Lithium-Ion Rechargeable Battery
• 1800mAh Capacity
• 10% More Capacity than Previous Models
• For Insta360 X3

Power your X3 action camera with this Rechargeable 1800mAh Battery from Insta360. With a 10% increased capacity for a total of 1800mAh, this battery ensures you can capture all the action for up to 81 minutes. Its lithium-ion chemistry can be recharged in just 90 minutes for continued use. Included with the battery is a box to store it in with built-in memory card storage.

Laleader Video Light Battery NP-F970

Key Features

• Extra Long Life
• Quick Charge
• No Memory Effect
• USB C port supports 5V/2A Type Charge
• Battery Indicator
• Capacity 6600mAh 48.84Wh

LED indicator displays the current battery charging status.4 bar of the battery indicator. Rechargeable with type C cable. Safety overcharging, short circuit protection, and overheat protection.

DJI Car Charger for Mavic Air 2 Overview

Key Features

• Up to 35.6W of Charging Power
• Overheating & Low-Voltage Protection

Maximize your charging capabilities with the Car Charger for Air 2S & Mavic Air 2 Flight Batteries from DJI. This charger lets you recharge the flight batteries as you drive, or with an available car at your filming location. It provides up to 35.6W of power and built-in protections against overheating and low voltage.