Nitecore UCN1 Dual-Slot USB Travel Charger for Canon

Restore power To your Canon LP-E6, LP-E6N, and LP-E8 lithium-ion batteries with this compact UCN1 Dual-Slot USB Travel Charger from Nitecore. It operates on 5 VDC input power, and features an attached USB cable that stored in a trough To save space and prevent damage. The USB connector allows for connection To one of various user-supplied adapters, portable power banks, and solar panels. When used in conjunction with a fully charged 18650 battery, Nitecore own F1 flexible bank will provide enough juice To charge two To three camera batteries To their full capacities. As an added convenience, the device has a second slot on the rear To accommodate a backup battery.

The sophisticated UCN1 contains a smart charging management system, which monitors battery types, capacities, and initial internal resistance, then automatically applies the most appropriate charging current based on this data. The device also provides battery condition monitoring, carrying out a health inspection based on resistance at the time of installation. A cell health bar will appear on the LCD display, which also shows capacity, voltage, and percentage of charge completed. When a battery health has declined To the lower limit, the bar will start flashing To alert you that it should be replaced.

The UCN1 offers a mechanical reverse polarity protection mechanism that prevents charging from occurring if an incompatible or incorrectly installed battery is present. Additionally, the error message "EE" will appear on the LCD To notify you in the event that a short-circuited battery is detected. Yet another helpful feature is the battery recovery mode that restores dormant cells To active duty.

Built for durability, the UCN1 is made from polycarbonate and ABS plastics that are corrosion-resistant and fire-retardant. When this toughness is coupled with the convenient compactness and considerable versatility of the UCN1, the result is a charger that ideal for travel, camping, and almost any other adventure in your life.

Compatible Batteries
Canon LP-E6, LP-E6N, and LP-E8 Li-ion batteries

Compatible Cameras
Canon EOS 5D Mark …, 5DS, 5DS R, 6D, 7D, 7D Mark …¡, 60D, 60Da, 600D, 650D, 700D, 70D

Panasonic DMW-BLK22 Overview

Power Select Panasonic cameras with the DMW-BLK22 rechargeable lithium-ion battery. This 2200mAh-capacity, 7.2V battery can be charged with the optional DMW-BTC15 or inside the camera via USB.

Camera Compatibility

•  Lumix DC-S5

Godox 2 Overview

The Battery Charger for AD600 from Godox powers up the Witstro AD600's lithium-ion battery which provides 500 full-power flashes to the AD600.

UC18 is a dedicated USB Charger for most of the Ving Series Camera Flashes that allows charging VB-18 batteries directly from a USB source such as a computer.

Godox WITSTRO ARB4500 Battery for AR400 Ring Flash

Godox VC26 Overview

The Godox VC26 USB Charger for V1 Battery is connected to your computer for charging via a separate USB cable that's provided in the basic V1 package.

Godox VB26 Overview

The VB26 Battery for V1 Flash Head from Godox is a lithium-ion rechargeable power source for the head. When the battery is fully charged, it is capable of outputting 480 full-power flashes.

Godox LEADPOWER Inverter is designed in accordance with the industrial standard. Featured by excellent performance, powerful function, reliable stability and portable design, it becomes the ideal solution of outdoor AC power supply and indoor emergency supply. It is equipped with the professional optimization and dual modes including flash & non-flash mode and can be applied widely.

Adopting built-in battery structure, the inverter is supplied with high-quality NI-MH battery, which features convenient replacement. Besides, the standard charger is capable of charging the battery inside or outside the body. The external interface of anode and cathode can be connected with an external storage battery to supply the energy longer.

Powerful as a mini generator, LEADPOWER LP-750 can drive up 3000ws equipment with recycle time of 2s. Also, it is constructed for flash of 600ws to flash 380 times in full power, and for electrical devices with max.750W power consumption. It drives a 100 W halogen lamp for up to 60 minutes.

Battery SmartTools AA Charger

Godox WB1200H High-Capacity Battery for AD1200Pro

The rechargeable and interchangeable high capacity 5.2Ah 36V Lithium energy pack frees the serious shooter to illuminate with the dynamic and commanding Godox AD1200Pro anywhere, touting a long-lasting 187-watt hour reserve master uptime.

Versatile

The C1200P Battery Charger for the Godox AD1200Pro recharges the Lithium-ion battery packs designed for use anywhere. The charger operates on 100-240VAC worldwide usage, and is compatible for use with both varieties of the Lithium cells available, 2.6Ah or standard 5.2Ah high-capacity battery packs.

Key Features

• High-Capacity Battery for AD1200Pro
• Lithium-Ion Battery
• Capacity: Approx 36V, 5200mAh
• LED Capacity Indicator

Yoobao 150C memiliki berat 1.62Kg, bentuknya seperti magic com dan memiliki tali berwarna coklat di bagian samping agar dapat dengan mudah dipegang dengan satu tangan.

Yoobao 150C memiliki kapasitas baterai 48000mAh, empat port USB (3 * USB-A + 1 * USB-C), dan interface USB-C memiliki 30W Kemampuan pengisian cepat dua arah, selain pengisiannya sendiri. Alat ini juga dapat digunakan untuk mengisi perangkat digital seperti laptop.

Yoobao 150C memiliki soket pengisi daya mobil, konektor jumper starter mobil, sangat berguna ketika mobil sedang dalam keadaan darurat ketika mobil tidak dapat dihidupkan karena kehilangan daya.

Yoobao 150C juga mendukung inverter 220V, melalui Yoobao 150W opsional inverter dapat menghasilkan AC 220V AC, dengan mudah memenuhi kebutuhan drone, lemari es mobil, proyektor dan peralatan lainnya.

Alat ini juga sangat cocok sebagai peralatan emergency ketika listrik padam.

 

Insta360 ONE R Battery BaseOverview

The Insta360 ONE R Battery Base is a central component of the modular ONE R action camera system. It holds the interchangeable modules together. The Core module and any other module of your choice mount side by side on this Battery Base, connecting into electronic contacts on it to work together with it as one unit. At the same time, it powers the modules via a built-in 1190 mAh battery that provides up to 65 to 70 minutes of runtime. It's rechargeable via a USB Type-C port when fully assembled with two modules. It cannot be charged by itself.

Like all the other modules, the Battery Base is waterproof down to 16' when assembled with two modules and installed in the ONE R Mounting Frame. No waterproof housing will be required. The Mounting Frame and other modules are sold separately.

Hasselblad Hasselblad Battery Charging Hub for X System Overview

Key Features

• 2-Bay Charger with USB Type-C Connector
• LED Indicators Show Status & Capacity
• For Current X System 3400mAh Batteries
• Charges First Gen X System Batteries
• Audible Chime Announces Charge Complete
• Includes Power Supply

The 2-bay Battery Charging Hub for X System from Hasselblad supports the current 3400mAh batteries. It charges a single battery in two hours and 18 minutes and two cells charge in two hours and 48 minutes. The charging hub is also compatible with first generation X System 3200mAh batteries that will charge in approximately three hours. When the cells are fully charged, the hub will announce an audible chime. Additionally, the charger supplies power to the batteries from power banks through its USB Type-C connector or via its included power supply. During the charging process, the front LEDs indicate the status and capacity of the batteries.

Godox UC20 Overview

Key Features

• Charges Li-Ion Battery via USB

The USB Charger for V350 Series On-Camera Flashes from Godox allows you to charge these flash units' lithium-ion batteries from a USB source such as a computer.

Avangarde Power Adapter for Camera LP-E6

Produk ini cocok bagi anda yang menginkan baterai kamera anda terisi terus menerus karena produk ini merubah Arus AC menjadi Arus DC untuk kamera anda.
Produk ini banyak digunakan para VLOGGER yang live streaming dalam jangka waktu lama, ataupun bagi anda yang membutuhkan kepraktisan dimana anda dapat selalu memiliki tenaga bagi kamera anda kapanpun anda butuhkan (selama ada colokan listrik).
Cocok juga untuk fotografi dalam jangka waktu lama seperti Time Lapse.
 

LPE-10Dummy Battery DC Coupler with adaptor For Canon

Package includes : 1x AC Power Adapter 1x Kabel Power

kompatibel untuk semua kamera canon seri LPE10

Godox C20 Battery Charger for Godox V350

 is a replacement for the one that comes with your V350 flash. It is designed for the VB20 lithium-ion battery, charging it fully in approximately two hours and a half. On the front are five LED indicators that conveniently display the battery level and show whether the charger is receiving power.

Features

• Replacement or Spare Part
• Recharges Battery Fully in 2.5 Hours
• Five LEDs Show Power and Battery Level

Godox VC26T Triple Charger for V1

This Godox VC26T Multi-Battery Charger for V1 is an AC-powered battery charger designed for rechargeable Godox VB26 batteries. Designed for portability and easy operation, it can three charge batteries simultaneously.

Power
Input: 100V-240V / 1/A
Output/Charging Time: 8.4V/1.35A / Approximately 1.4 Hours

Sony NP-FV50A / C ECN

The Sony NP-FV50A is a 7.3V, 950mAh capacity lithium-ion battery compatible with all Handycam camcorders. It's designed with Sony's V-Series InfoLITHIUM feature, which enables it to communicate remaining time in minutes to the camera's LCD, so you know exactly how much time you have left. It can be charged while connected to the camera or off a dedicated charger, such as the AC-VQV10.

Ricoh BJ-11 Overview

Key Features

• For DB-110 Lithium-Ion Battery

Dedicated to use with the Ricoh DB-110 rechargeable lithium-ion battery, the BJ-11 Battery Charger is an efficient means for keeping your batteries powered up.