Key Features
Capture stable images on your travels and achieve smooth tilting and panning with this flame orange X-Aircross 3 Video Carbon Fiber Tripod from Fotopro. With a total weight of 2.4 lb including its fluid head, the portable X-Aircross 3 Video folds down to only 18.2", making it ideal for travel. It can support camera rig loads up to 11 lb.
The removable center column allows you to open the tripod legs so your tripod head until it is only 6.6" off the ground. The end of the center column features a utility hook and when removed, reveals a hidden smartphone holder to mount your smartphone onto the 1/4"-20 accessory thread on the tripod. The head also features a bubble level and an Arca-type plate, and it can be used for horizontal or vertical shooting.
Fluid Video Head
Tilting and panning are smooth, and it can pan 360° and tilt for horizontal or vertical shooting. It features an Arca-type quick release plate with a 1/4"-20 mounting screw.
Low- and High-Angle Shooting
The 5-section legs allow you to extend the legs up to 59.4" in height and the center column can be removed to lower the height to 6.6" for very low-angle shots.
One-Second Lock Structure
A single twist and one pull will get the legs open, locked in place, and ready for action.
"No Center Column" Mode for Ultralow Shooting
Unscrew the removable center column and open the legs low to the ground to capture macro shots or creative eye-level water flow scenes.
Hidden Mount on Column
The center column features a hook on the bottom, and the hook piece can be removed to reveal a hidden smartphone mount to mount your smartphone on the tripod.
Additional Features
Bubble level
Rubber feet
11 lb load capacity
1/4"-20 accessory thread
Camera Plate
Camera Plate Features | Quick Release |
Camera Plate Type | Arca-type |
Camera Mounting Screw | 1 x 1/4"-20 Male |
Safety Lock | Yes |
Head
Base Mount | Flat Base |
Counter Balance | None |
Bubble Level | 1 |
Accessory Mounting | 1 x 1/4"-20 Female Thread |
Pan & Tilt
Panning Range | 360° |
Independent Pan Lock | Yes |
Independent Tilt Lock | Yes |
General
Load Capacity | 22 lb / 10 kg |
Maximum Working Height | 4.9' / 150.8 cm |
Minimum Working Height | 66.1" / 168 cm |
Closed Length | 18.2" / 46.3 cm |
Materials | Aluminum, Carbon Fiber |
Operating Temperature | -22 to 158°F / -30 to 70°C |
Weight | 2.1 lb / 940 g |
Legs
Leg Lock Type | Flip Lock |
Independent Leg Spread | Yes |
Leg Sections | 5 |
Leg Diameter | 1.0" / 25 mm |
Bubble Level | None |
Feet Features | Rubber |
Center Column
Center Column Features | Ballast Hook, Removable |
Center Column Sections | 1 |