Godox AD200 + MagMod MagBox 24 Inchi Octa Pro Kit

Godox AD200 + MagMod MagBox 24 Inchi Octa Pro Kit
  • Views: 603
  • Brand: GODOX
  • Product Code: Godox AD200 + MagMod MagBox 24 Inchi Octa Pro Kit
  • Availability: In Stock
0 Product(s) Sold
Garansi Godox 1 Tahun
  • IDR 11,600,000
Chat via WA
Ingin pesan di marketplace? Silahkan klik

Godox AD200 TTL Pocket Flash Kit

The AD200 TTL Pocket Flash Kit from Godox is built around a unique flash light source that has a standard speedlite head and a bare bulb head that give you the option of 2 distinctly different qualities of light. The kit comes with the 2 heads, lithium battery, charger and carry case.

The speedlight head outputs the standard look of an on-camera flash that can be modified using an optional softbox, beauty dish or umbrella. The bare bulb head features a removable flash tube and produces 360 degrees of soft, bright, nearly shadowless light. The head uses optional reflectors that focus the beam angle and give you directional control. The AD200 has impressive core features such as 200 Ws of power adjustable in 8 steps from 1/128 to 1/1, recycling from 0.01 to 2.1 seconds and flash durations as short as 1/11,300 sec. The flash runs on a removal rechargeable lithium battery that will give you up to 500 full power flashes and thousands of lower power flashes.

The AD200 has 3 flash modes: Manual, TTL, and Multi (Stroboscopic). Manual outputs the user's choice of power, modeling light, first or second curtain sync, etc. Multi controls the stroboscopic rate up to 90 times (90 Hz). TTL takes advantage of the flash head's built-in X1 receiver. Optional X1 TTL transmitters are available for Nikon, Canon, Sony, Olympus, Panasonic and Fuji cameras. They will also detect a separately purchased LED head. The 32-channel wireless system controls flash mode, first and second curtain sync, High-speed sync up to 1/8000 sec, power level, modeling lamp and ready beeper at distances up to 328'. Firmware updates are obtainable on the Godox website.

Built-In 2.4 GHz Wireless X System
Built-in wireless receiver: control triggering power level, alert beep with optional wireless transmitter. Compatible with Nikon, Canon, Sony, Olympus, Panasonic and Fuji TTL.

Bare Bulb and Speedlight Flash Heads
Bare bulb and speedlite flash heads are included to vary your quality of light. Color temperature is a steady 5600K over the entire power range.

Large Capacity Lithium Battery Pack
The 14.4 V / 2900 mAH battery pack gets 500 full power flashes with 0.01 to 2.1 sec. recycling.

AV Panel
Easily readable digital panel displays your adjustments

Accessories
Barn Doors, color filters and diffusers are available to personalize your work.

Numerous Control Functions

  • 8-step power range: 1/1 to 1/128
  • Supports flash exposure compensation
  • 1/8000 sec high-speed Sync
  • First and second curtain sync
  • Modeling lamp
  • Manual flash
  • Multi flash
  • Custom functions

 

Product Highlights

  • 1 x MagBox 24" Octa Softbox & Diffuser
  • 1 x MagShoe
  • 1 x MagRing
  • 1 x MagBox Small Case
  • 1 x MagBox Correction Gel Set
  • 1 x MagBox 24 Octa FocusDiffuser

MagMod has put together this MagBox 24 Octa Pro Kit for photographers who want to maximize the potential of their speedlights while having the option to configure the system for use with strobes. The kit includes the 24" MagBox Octa softbox with diffuser, a MagRing that holds one or two flashes, a MagShoe for handholding or stand-mounting, and a set of CT correction gels. Also included is the FocusDiffuser which narrows the Octa's beam spread while increasing its output two or three stops. It all fits in the provided case.

MagBox 24 Octa Softbox (24")

Featuring a one-piece design and a magnetic base for very fast set up and breakdown, the 24" MagBox 24 Octa Softbox from MagMod is compatible with Profoto, Bowens, Elinchrom, or Paul C. Buff strobes with optional dedicated adapters and one or two speedlights with the addition of the MagGrip that is sold separately. One of the MagBox's most noticeable features is its evenness of output from edge to edge. Remarkably, this is done without an internal baffle and without exhibiting a hot spot. For personal expression, there are two available gel kits with a variety of colors that slip into the softbox's integrated gel holder, while there's also a CTO set for conversion of your light source to tungsten balance. Finally, sold separately, MagMod's FocusDiffuser functions like a grid and a lens combined, allowing you to control spill and direct the light while increasing its output.

Magnetic Attachment

Magnets inside the base of the MagBox make attachment fast, silent, and super strong. Even if you tilt your softbox at a deep angle or (for some reason) shoot inside a wind tunnel, the MagBox and the MagRing are staying put.

Easy Set Up and Tear Down

The MagBox is one solid piece. Pop it open with an easy click. With magnets in the base, you can throw it onto your MagRing in a second. When you're ready to remove the MagBox from the MagRing, simply press the Magnetic Field Disrupter. Then fold up the MagBox; it collapses in one neat, portable piece and can be stored safely in the MagBox Case.

Speedlight- and Strobe-Compatible

The versatile MagBox can be used with one or two speedlights - any flash that has MagMod's patented MagGrip installed will work. Or use one of the available adapters to mount your Profoto, Bowens, Elinchrom, or Paul C. Buff strobe.

Obstruction-Free Design

The calculated design of the MagBox 24 Octa distributes light evenly and without a hotspot, the reason why this softbox is devoid of an internal baffle. It can be used with one or two speedlights. The MagBox provides clean light quality and optimal output.

MagRing

The MagMod MagRing is a lightweight universal speedlight mount that accepts up to two speedlights that have been outfitted with MagMod's MagGrip (MagGrip not included). The MagRing features a cold shoe mounting foot and can mount to a MagMod MagShoe for handheld or stand-mounted use. Magnetic attachments are at the heart of the MagRing and are used to hold MagMod's MagBox softbox. Magnets also secure your speedlights when mounted with the MagGrip, and the MagRing incorporates locking doors for further security.

  • Neodymium magnets inside the MagGrip (not included) allow speedlights to attach securely to the MagRing without tools or locking knobs.
  • With your speedlights magnetically attached to the MagRing, close the rear latching doors for additional security.
  • The MagRing system is incredibly fast as it uses magnets and latches to secure your speedlights. This toolless mounting method makes for rapid setup and breakdown.
  • MagRing works with MagBox accessories.

MagShoe for MagRing

The MagMod MagShoe for MagRing is a lightweight ergonomic holder for your MagRing flash holder. The MagShoe can be mounted to a stand with a 5/8" pin or easily carried handheld, and it accepts either a flash or the MagRing using a cold shoe mounting system. It is designed to operate with only one hand, leaving your other hand available to hold your camera, which allows you to mount your flash or MagRing and lock it in place with a single hand.

The single-handed operation extends to the tilt function, which is controlled by a simple trigger that you squeeze to release the lock. This allows you to have a secure grip on the MagShoe while locking or unlocking it with the same hand that is holding it secure. Releasing the trigger engages the tilt lock, which allows the MagShoe to support your MagRing, two flashes, and the MagBox softbox. It integrates an umbrella mounting hole with lock, allowing you to create that familiar soft look. The plastic exterior of the MagShoe is gentle on your hands, and will not accidently trigger your flash via its hot-shoe mounting foot.

  • The built-in locking lever is designed to be locked or unlocked using only one hand. It features an integrated locking ring that locks your flash or MagRing in place without using the locking ring on your flash.
  • When mounted on a stand, you can tilt the MagShoe forward or back over a range of 155° by simply squeezing the trigger and tilting the unit. Releasing the trigger re-engages the tilt lock. this is a single-handed operation that does not require tightening or loosening locking levers or knobs.

MagBox Case

The travel-friendly MagMod MagBox Case is designed to hold, protect, and transport your MagBox Light, MagRing, two MagShoes, two speedlight flahses, two FocusDiffusers, and twenty four or more MagBox Gels.

MagBox 24 Octa FocusDiffuser

Featuring a unique design that employs micro-structures, the MagBox 24 Octa FocusDiffuser from MagMod functions like a combination of a grid and a lens to modify the softbox's beam spread. Attaching in seconds via integrated magnets, the FocusDiffuser narrows the wide beam to 20 or 40 degrees depending on orientation, while it increases the output two to three stops.

Innovative Function

Inside the FocusDiffuser, micro-structures alter the angle of light in 40- or 20-degree beam angles, softly redirecting light forward and causing less spill.

Increases Effective Light Output

The FocusDiffuser gives you the same increase in effective light output potential as that in a larger modifier.

Better Control of Soft Light

Create flattering soft light and place it exactly where you want it. The FocusDiffuser limits spill light to give you the control you need to work more efficiently and save time in post.

Easier than a Fabric Grid

The FocusDiffuser attaches to the MagBox in seconds, quietly and easily via integrated magnets. And when you're done with it, you can roll it up neatly and store it safely inside your MagBox Case.

Up to 700% More Light

The MagBox's output with the FocusDiffuser is up to 2.8 stops brighter. It gives you the softness you'd expect with the control and precision of a grid.

Correction Gel Set

Put together by MagMod to assist photographers in converting their speedlight's daylight color balance to tungsten or to warm or cool its quality of light, the Correction Gel Kit contains eight rigid polycarbonate gels that slip into the integrated slot in the MagBox Octa. The set includes a Full CTO, 1/2 CTO, and, 1/4 CTO filters, as well as Full CTB, 1/2 CTB, Full Plus Green, 1/2 Plus Green, and an 8x ND filter. The gels require separate purchase of a MagGrip for use.

 

Write a review

Note: HTML is not translated!
    Bad           Good

Tags: Godox AD200 + MagMod MagBox 24 Inchi Octa Pro Kit,